最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
多物理場耦合燒結制備超細WC-Ni硬質合金致密化機理
DOI:
作者:
作者單位:

四川大學制造科學與工程學院,610065,四川大學制造科學與工程學院,610065,四川大學制造與科學工程學院,610065,四川大學制造科學與工程學院,610065,四川大學制造科學與工程學院,610065,四川大學制造科學與工程學院,610065,四川大學制造科學與工程學院,610065

作者簡介:

通訊作者:

中圖分類號:

基金項目:

(No. 51275322)對論文的支持。


Fabrication of Ultrafine WC-Ni Cemented Carbide by Coupled Multi-physical Fields Activated Sintering Technology
Author:
Affiliation:

Sichuan University,School of manufacturing and science and engineering,610065,Sichuan University,School of manufacturing and science and engineering,610065,,Sichuan University,School of manufacturing and science and engineering,610065,Sichuan University,School of manufacturing and science and engineering,610065,Sichuan University,School of manufacturing and science and engineering,610065,Sichuan University,School of manufacturing and science and engineering,610065

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    為了研究Ni含量對WC-Ni硬質合金性能的影響，利用多物理場耦合燒結方法制備不同Ni含量的超細WC-Ni硬質合金，結果顯示：多物理場耦合燒結方法可以成功制備WC-Ni硬質合金，隨著Ni含量增加，WC-Ni硬質合金的組織更加致密，試樣的相對致密度逐漸增加，但WC顆粒發生了輕微的長大現象；同時，顯微硬度先增后減，在Ni含量為8%時達到最大值，韌性KIC則隨Ni含量的增加迅速增加到8.5 MPa.m1/2。

    Abstract:

    Ultrafine WC-Ni cemented carbides were manufactured by coupled multi-physical fields activated technology to study the effect of the Ni content to sintering of WC-Ni cement carbide. It was found that multi-physical fields activated technology is an effective method to manufacture WC-Ni cemented carbide, and when the content of Ni increased, the micro pore diminished, and densification of the samples increased, but the particle size of WC increased. In addition, firstly, the Micro hardness increases quickly and then decrease with the increasing of the Ni content. At the same time, the fracture toughness (KIC) increase sharply to 8.5 MPa.m1/2 with the increase of the Ni content.

    參考文獻
    相似文獻
    引證文獻
引用本文

周宇,姜薇,陳依桐,楊屹,楊剛,尹德強,劉劍.多物理場耦合燒結制備超細WC-Ni硬質合金致密化機理[J].稀有金屬材料與工程,2017,46(2):561~564.[Yu ZHOU, Wei JIANG, chenyitong, Yi YANG, Gang YANG, Deqiang YIN, Jian LIU. Fabrication of Ultrafine WC-Ni Cemented Carbide by Coupled Multi-physical Fields Activated Sintering Technology[J]. Rare Metal Materials and Engineering,2017,46(2):561~564.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2015-09-29
  • 最后修改日期:2015-12-15
  • 錄用日期:2016-01-14
  • 在線發布日期: 2017-04-10
  • 出版日期: