最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

The impacts of different mass fraction TiC (0%, 5%, 10 /%, 15%) on the microstructure and properties of titanium-based composite material by microwave sintering were studied.The results show that the TiC/TC4 composite material is only consist of TiC and matrix ɑ-Ti + β-Ti. The relative density, microhardness and compressive strength of the TiC/TC4 composite increase with the increasing of TiC content at room temperature, which reaching 98.01%, 661 HV, 1789MPa respectively, the relative density of the composite increases about 2% to 6% compared to the vacuum sintering with the referred literatures, and the compressive strength increases about 5% to 15% compared to the cast titanium matrix composites prepared by melting-casting process. Beside, the wear resistance of TiC/TC4 composite also enhances with the addition of TiC content which the friction coefficient is between 0.25 to 0.30.Therefore its wear mechanism changes from the abrasive wear and adhesive wear into a slight delamination.