2涂層;抗燒蝕性"/> 2。當溫度高于2000℃時,熔融TiO2的厚度隨之增加,這將進一步導致涂層結合強度降低,本文采用等離子噴涂方法制備了不同ZrO2添加量的TiC/ZrO2復相涂層,以提高涂層的抗沖刷性能。分別利用XRD、SEM和EDS對燒蝕前后材料的相結構、微觀形貌和成分進行了分析,探討了添加高熔點相ZrO2的復合涂層的抗燒蝕機理。結果表明：TiC/ZrO2復相涂層展現出更好的抗燒蝕性能,2000℃下的質量燒蝕率僅為1.5×10-4 g.cm-2.s-1。燒蝕過程中產生的ZrO2層可以阻止內部TiC的進一步氧化,并且可以在一定程度上降低氧乙炔焰對涂層的產生的剪切力,以提高涂層的康沖刷性能。"/>

最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
等離子噴涂TiC/ZrO2復相涂層的抗燒蝕性能研究
DOI:
作者:
作者單位:

北京理工大學材料學院,北京理工大學材料學院,北京理工大學材料學院,北京理工大學材料學院

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金項目（面上項目，重點項目，重大項目）


Ablation resistance property of TiC/ZrO2 coating deposited by plasma-spraying
Author:
Affiliation:

School of Material Science and Engineering,Beijing Institute of Technology,Beijing,School of Material Science and Engineering,Beijing Institute of Technology,Beijing,School of Material Science and Engineering,Beijing Institute of Technology,Beijing,School of Material Science and Engineering,Beijing Institute of Technology,Beijing

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    針對TiC涂層在高溫?zé)g過程中氧化生成熔融TiO2。當溫度高于2000℃時,熔融TiO2的厚度隨之增加,這將進一步導致涂層結合強度降低,本文采用等離子噴涂方法制備了不同ZrO2添加量的TiC/ZrO2復相涂層,以提高涂層的抗沖刷性能。分別利用XRD、SEM和EDS對燒蝕前后材料的相結構、微觀形貌和成分進行了分析,探討了添加高熔點相ZrO2的復合涂層的抗燒蝕機理。結果表明：TiC/ZrO2復相涂層展現出更好的抗燒蝕性能,2000℃下的質量燒蝕率僅為1.5×10-4 g.cm-2.s-1。燒蝕過程中產生的ZrO2層可以阻止內部TiC的進一步氧化,并且可以在一定程度上降低氧乙炔焰對涂層的產生的剪切力,以提高涂層的康沖刷性能。

    Abstract:

    In high temperature ablation process, the TiC coating will be oxidized to TiO2. The thickness of molten TiO2 increases when the temperature is higher than 2000℃, which decreases the bonding strength of coating. In this study, the TiC/ZrO2 coatings with different content of high melting phase ZrO2 were deposited by plasma spraying, in order to improve the anti-scouring property of TiC coatings. The phase structure, microstructure and composition of coatings, before and after ablation, were characterized by XRD, SEM and EDS, respectively. The ablation resistant mechanism of coatings with high melting phase ZrO2 was discussed. The results indicate that the TiC/ZrO2 coating shows good ability of ablation resistance, and its weight loss is only 1.5×10-4 g.cm-2.s-1 at 2000℃. The ZrO2 layer formed during the ablation can restrain the further oxidation of inner TiC and reduce the shearing force of oxyacetylene flame, which improves the anti-scouring property of coatings.

    參考文獻
    相似文獻
    引證文獻
引用本文

馬壯,李文智,高麗紅,文波.等離子噴涂TiC/ZrO2復相涂層的抗燒蝕性能研究[J].稀有金屬材料與工程,2017,46(8):2097~2101.[Ma Zhuang, Li Wenzhi, Gao Lihong, Wen Bo. Ablation resistance property of TiC/ZrO2 coating deposited by plasma-spraying[J]. Rare Metal Materials and Engineering,2017,46(8):2097~2101.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2015-07-24
  • 最后修改日期:2015-10-24
  • 錄用日期:2015-11-18
  • 在線發布日期: 2017-11-16
  • 出版日期: