x高熵合金涂層,研究了硼含量對激光熔覆FeCrNiCoMnBx高熵合金涂層的組織結構、硬度和摩擦磨損性能的影響,以及硼化物中層錯形成機制。結果表明：涂層均由簡單FCC相和硼化物兩相組成。當硼含量x≤0.75時,生成的硼化物以 (Cr, Fe)2B相為主；而當硼含量x=1時,生成大量的(Fe, Cr)2B相。隨著硼含量的增加,涂層中的硼化物含量增加,硬度增大,耐磨性能增強。硼化物(Fe, Cr)2B相在(10)中存在大量堆垛層錯。硼化物中的層錯是(Fe, Cr)2B相通過(10) 面的層錯(滑移距離為1/4[11])方式而向(Cr, Fe)2B相轉變而產生。"/>

最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
激光熔覆FeCrNiCoMnBx高熵合金涂層的組織結構與性能
DOI:
作者:
作者單位:

福州大學,福州大學,福建工程學院,福建工程學院,福州大學

作者簡介:

通訊作者:

中圖分類號:

TG113

基金項目:

福建省教育廳重點項目(JA11179),福建省高校產學合作重大項目(2012H6001),福建工程學院科研資助項目(E0600133)。


Microstructure and properties of FeCrNiCoMnBx high-entropy alloy coating prepared by laser cladding
Author:
Affiliation:

Fuzhou University,Fuzhou University,College of Fujian University of Technology,College of Fujian University of Technology,Fuzhou University

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用激光熔覆技術制備FeCrNiCoMnBx高熵合金涂層,研究了硼含量對激光熔覆FeCrNiCoMnBx高熵合金涂層的組織結構、硬度和摩擦磨損性能的影響,以及硼化物中層錯形成機制。結果表明：涂層均由簡單FCC相和硼化物兩相組成。當硼含量x≤0.75時,生成的硼化物以 (Cr, Fe)2B相為主；而當硼含量x=1時,生成大量的(Fe, Cr)2B相。隨著硼含量的增加,涂層中的硼化物含量增加,硬度增大,耐磨性能增強。硼化物(Fe, Cr)2B相在(10)中存在大量堆垛層錯。硼化物中的層錯是(Fe, Cr)2B相通過(10) 面的層錯(滑移距離為1/4[11])方式而向(Cr, Fe)2B相轉變而產生。

    Abstract:

    An FeCrNiCoMnBx high-entropy alloy coating was prepared by laser cladding on a low carbon steel substrate. The effect of boron addition on the microstructure, hardness, and wear resistance of FeCrNiCoMnBx was studied. The formation mechanism of stacking faults (SFs) in boride was analyzed. Results showed that the coatings had a simple FCC structure with boride precipitation. Boride precipitation was mainly the (Cr, Fe)2B phase when the boron content x was increased from 0.25 to 0.75. However, as the value of x reached 1.0, many (Fe, Cr)2B phases were found in the boride. The volume fraction of borides increased with the increase in boron content. Hardness and wear resistance of the coating were also enhanced with the increase in boron content. (Fe, Cr)2B borides had high-density SFs on the (10) planes. The generation of SFs in (Fe, Cr)2B occurred probably because of the (Fe, Cr)2B → (Cr, Fe)2B phase transformation generated by a simple shear of (Fe, Cr)2B (10) planes (with shear vectors at nearly 1/4 [111]).

    參考文獻
    相似文獻
    引證文獻
引用本文

張沖,吳炳乾,王乾廷,陳鼎寧,戴品強.激光熔覆FeCrNiCoMnBx高熵合金涂層的組織結構與性能[J].稀有金屬材料與工程,2017,46(9):2639~2644.[Zhang Chong, Wu Bingqian, Wang Qianting, Chen Dingning, Dai Pinqiang. Microstructure and properties of FeCrNiCoMnBx high-entropy alloy coating prepared by laser cladding[J]. Rare Metal Materials and Engineering,2017,46(9):2639~2644.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2015-06-06
  • 最后修改日期:2015-08-11
  • 錄用日期:2015-09-07
  • 在線發布日期: 2017-11-29
  • 出版日期: