最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
純鉬板材真空環境高溫拉深性能研究
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


High-temperature Deep Drawability of Pure Molybdenum Sheet in Vacuum Environment
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    在25~870 ℃溫度范圍內進行了厚度為2.0 mm純鉬板的單向拉伸試驗，建立了高溫拉深有限元分析模型。通過數值模擬與試驗對比分析，確定了純鉬板高溫變形摩擦與溫度的關系，研究了成形溫度、潤滑、壓邊間隙和模具尺寸對熱拉深工藝的影響，并采用優化的工藝參數進行了平底杯形沖頭熱拉深試驗。結果表明，潤滑條件對純鉬板熱拉深影響最顯著，其次是成形溫度；在成形溫度870 ℃，拉深速度30 mm/min，有潤滑，壓邊間隙2.5 mm的參數組合下，最大拉深比可達1.94

    Abstract:

    Uniaxial tensile tests for pure molybdenum sheets with thickness of 2.0 mm were conducted in a temperature range between 25 and 870 °C, and the finite element model for hot deep drawing of molybdenum plate was established. Based on the contrastive analysis of FEM and experiments, the relationship between friction coefficient and temperature was confirmed, and the effects of forming temperatures, lubricating conditions, blank-holder gap and die dimensions on deep drawing process were investigated, and then the vacuum hot deep drawing tests were carried out with optimized process parameters. The results indicate that lubrication has the most prominent effect on the deep-drawing process, followed by the forming temperature. The limiting drawing ratio can be raised up to 1.94 with the optimum parameters including forming temperature 870 °C, drawing speed 30 mm/min and blank-holder gap 2.5 mm under lubricated condition

    參考文獻
    相似文獻
    引證文獻
引用本文

孟 寶,萬 敏,吳向東,周應科,彭靜文,蔣 政.純鉬板材真空環境高溫拉深性能研究[J].稀有金屬材料與工程,2015,44(6):1385~1390.[Meng Bao, Wan Min, Wu Xiangdong, Zhou Yingke, Peng Jingwen, Jiang Zheng. High-temperature Deep Drawability of Pure Molybdenum Sheet in Vacuum Environment[J]. Rare Metal Materials and Engineering,2015,44(6):1385~1390.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2014-06-20
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2016-01-04
  • 出版日期: