最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
鈦-鋼爆炸復合板熱處理過程中的擴散行為及數學模型
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Diffusion Behavior and Mathematical Model of Ti-Steel Explosive Clad Plate
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    利用光學顯微鏡、掃描電子顯微鏡、X射線衍射儀、俄歇電子能譜分析儀和拉剪實驗，研究了不同的熱處理加熱溫度和保溫時間對鈦-鋼爆炸復合板界面組織特征和性能的影響。熱處理溫度為750、850、950 ℃，保溫時間為30、60、120 min。結果表明：熱處理過程加速了組織轉變和界面元素?cái)U(kuò)散。界面元素?cái)U(kuò)散主要形成的化合物為TiC和Ti-Fe金屬間化合物（Fe2Ti/FeTi）。隨著溫度的升高，界面擴散層厚度增加，復合板剪切強度下降。根據實驗數據，提出了界面擴散層厚度和剪切強度與加熱溫度和保溫時間的函數關系

    Abstract:

    Effects of heat treatments on microstructure and mechanical properties of Ti-steel explosive clad plates were investigated by optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD), auger electronic spectrum (AES) and shear test. The Ti-steel explosive clad plates were subjected to a heat treatment process in the temperature range of 650~950 oC for 30~120 min. The results show that the heat treatment process leads to a great enhancement of diffusion and microstructural transformation. During the heat treatment process, a large amount of Ti-Fe intermetallics (Fe2Ti/FeTi) along with some TiC distributing continuously are formed at diffusion reaction layer. With the treatment temperature increasing, the thickness of diffusion layer increases and the shear strength decreases, whose functional relationship was proposed with the heat temperature as well as the holding time according to the experimental data

    參考文獻
    相似文獻
    引證文獻
引用本文

江海濤,閻曉倩,劉繼雄,曾尚武,段曉鴿.鈦-鋼爆炸復合板熱處理過程中的擴散行為及數學模型[J].稀有金屬材料與工程,2015,44(4):972~976.[Jiang Haitao, Yan Xiaoqian, Liu Jixiong, Zeng Shangwu, Duan Xiaoge. Diffusion Behavior and Mathematical Model of Ti-Steel Explosive Clad Plate[J]. Rare Metal Materials and Engineering,2015,44(4):972~976.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2014-04-12
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2015-06-08
  • 出版日期: