最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
Ni-Cr合金釬料激光釬焊金剛石磨粒界面顯微結構及形成機理
DOI:
作者:
作者單位:

河南理工大學 河南 焦作 454000,河南理工大學 河南 焦作 454000,河南理工大學 河南 焦作 454000,河南理工大學 河南 焦作 454000

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金項目（面上項目，重點項目，重大項目）


The interface microstructure and formation mechanism of diamond abrasives laser brazed with Ni-Cr solders
Author:
Affiliation:

Henan Polytechnic University,Henan Polytechnic University,Henan Polytechnic University,Henan Polytechnic University

Fund Project:

National Natural Science Foundation of China (51364025)

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    本文采用Ni-Cr合金釬料,在Ar氣保護條件下,對金剛石磨粒進行了激光釬焊試驗研究。采用掃描電鏡(SEM)和能譜儀(EDS)及X射線衍射儀(XRD)分析金剛石磨粒與Ni-Cr釬料結合界面的組織結構與物相組成,并研究了釬料與金剛石界面處碳化物的形成機理。測試結果表明,激光釬焊過程中在金剛石表面附近形成的富Cr層與金剛石表面的C元素反應生成碳化物Cr3C2,通過反應熱力學與動力學分析顯示界面反應產物可以依靠置換反應形成,使金剛石磨粒與釬料實現了牢固結合。

    Abstract:

    In this paper, the laser brazing of diamond abrasives using Ni-based solders in an Ar atmosphere was investigated. The microstructure and phase composition of interfaces between diamond abrasives and Ni-based solders were analyzed using scanning electronic microscopy (SEM), energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD). Meanwhile, the formation mechanism of carbides at interfaces between solders and diamond abrasives was discussed. The results indicate that during laser brazing, the Cr-enriched layer around the diamond surface reacts with the C in the diamond surface and consequently forms Cr3C2. Based on reaction thermodynamics and kinetics analysis, it is revealed that the interface reaction products can be formed via replacement reactions, which realizes the tight combination between diamond abrasives and solders.

    參考文獻
    相似文獻
    引證文獻
引用本文

楊志波,劉愛菊,劉石安,楊瑞云. Ni-Cr合金釬料激光釬焊金剛石磨粒界面顯微結構及形成機理[J].稀有金屬材料與工程,2016,45(5):1152~1156.[Zhibo Yang, Aiju Liu, Shian Liu, Ruiyun Yang. The interface microstructure and formation mechanism of diamond abrasives laser brazed with Ni-Cr solders[J]. Rare Metal Materials and Engineering,2016,45(5):1152~1156.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2015-04-14
  • 最后修改日期:2015-10-21
  • 錄用日期:2015-11-18
  • 在線發布日期: 2016-06-02
  • 出版日期: