最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
球磨工藝對原位合成納米級TiB的影響
DOI:
作者:
作者單位:

吉林大學材料學院 教育部汽車材料重點實驗室,吉林大學材料學院 教育部汽車材料重點實驗室,吉林大學材料學院 教育部汽車材料重點實驗室,吉林大學材料學院 教育部汽車材料重點實驗室,吉林大學材料學院 教育部汽車材料重點實驗室

作者簡介:

通訊作者:

中圖分類號:

TG

基金項目:

吉林省自然科學基金


Effect of ball milling process on the in situ synthesizing of nano-TiB whiskers
Author:
Affiliation:

Key Laboratory of Automobile Materials,Ministry of Education,and Department of Materials Science and Engineering,Jilin University,Key Laboratory of Automobile Materials,Ministry of Education,and Department of Materials Science and Engineering,Jilin University,Key Laboratory of Automobile Materials,Ministry of Education,and Department of Materials Science and Engineering,Jilin University,Key Laboratory of Automobile Materials,Ministry of Education,and Department of Materials Science and Engineering,Jilin University,Key Laboratory of Automobile Materials,Ministry of Education,and Department of Materials Science and Engineering,Jilin University

Fund Project:

JiLin Province Natural Science Foundation of China

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    球磨工藝對球磨粉末及其燒結組織的微觀結構和形態都有重要的影響。本實驗采用低能和高能球磨兩種方式對Ti-Al-0.2B wt.%合金粉末進行球磨,研究球磨過程中粉末組織和形態的變化,并將球磨后的粉末進行熱壓燒結,研究不同球磨方式對燒結組織中原位合成TiB增強相形態的影響。研究結果表明：低能球磨過程中粉末顆粒間有機械合金化發生,其燒結組織中生成的TiB為細長態,在基體中分布均勻,沒有聯結的粗晶或成簇生長現象。對于高能球磨,粉末顆粒細化效果明顯,顆粒平均尺寸降至1 μm,球磨過程中除了機械合金化還形成了Ti(Al)過飽和固溶體,并在球磨后期形成了非晶結構。經高能球磨的粉末燒結后,組織中生成了均勻分布的納米級TiB晶須。

    Abstract:

    Ball milling process has an important effect on the microstructure of final powder products and the corresponding as-sintered samples. In this study, Ti-Al-0.2B wt.% mixed powders were ball-milled by low-energy and high-energy types of ball mills, and then the milled powders were sintered by hot- pressing. On this basis, morphology evolution of the powders was analyzed, and the microstructure of the reinforcements in the as-sintered composites was investigated. In the low-energy ball milling process, mechanical alloying was occurred between the powder particles. TiB whiskers formed in sintering process were long and thin without coarse bars or clusters. For the high-energy type, the particle size was refined remarkably to 1um, and Ti (Al) supersaturated solid solution or even amorphous structure was formed during the milling process. In the following sintering process, nano-scale TiB whiskers were synthesized and they were uniformly distributed in the matrix.

    參考文獻
    相似文獻
    引證文獻
引用本文

劉利萍,劉勇兵,姬連峰,曹占義,楊曉紅.球磨工藝對原位合成納米級TiB的影響[J].稀有金屬材料與工程,2016,45(5):1157~1161.[Liu Liping, Liu Yongbing, Ji Lianfeng, Cao Zhanyi, Yang Xiaohong. Effect of ball milling process on the in situ synthesizing of nano-TiB whiskers[J]. Rare Metal Materials and Engineering,2016,45(5):1157~1161.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2015-04-03
  • 最后修改日期:2015-07-16
  • 錄用日期:2015-09-07
  • 在線發布日期: 2016-06-02
  • 出版日期: