最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
高溫形變熱處理對Ti-1300合金組織及硬度的影響
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

陜西省重點科技創新團隊計劃（2012KCT-23）；陜西省科技統籌創新工程項目（2012KCTG04-04）


Effect of High Temperature Thermomechanical Treatment on Microstructure and Hardness of Ti-1300 Titanium Alloy
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用光學顯微鏡、掃描電子顯微鏡、Gleeble-3800熱模擬試驗機以及IMVS-1000JMT2數顯維氏顯微硬度儀研究了等溫變形條件下形變熱處理對Ti-1300合金組織及硬度性能的影響。結果表明：高溫形變熱處理可以明顯的細化Ti-1300合金的顯微組織，并在一定程度上提高合金的力學性能。熱軋態合金的組織中粗大塊狀和長條狀α相經高溫壓縮變形后具有明顯的等軸均勻化趨勢，然后分別經過淬火時效和固溶時效處理后合金的組織主要由板條狀初生α相，針狀次生α相以及β相組成，初生α相和次生α相主要分布于晶界和β基體上。與淬火時效態相比，固溶時效態合金的硬度隨初生α相板條厚度和含量的增加而降低，最后對影響的機理進行探討和分析。

    Abstract:

    Effects of high temperature thermomechanical treatment on microstructure and hardness of Ti-1300 alloy under isothermal deformation condition were investigated by means of optical microscope (OM), scanning electron microscopy (SEM), thermal simulation testing machine (Gleeble-3800) and Vickers hardness tester (IMVS-1000JMT2). The results show that high temperature thermomechanical treatment can markedly refine the microstructure and improve the mechanical property of Ti-1300 alloy. Microstructure observation of the hot rolled and hot compressed samples indicates that the tendency of the coarse and elongated grains recovering to equiaxed shape is more obvious, and the microstructure of Ti-1300 alloy after quenching plus aging and solution plus aging treatment is composed of a mixture of primary α phase (αp), secondary α phase (αs) and β phase. The αp phase is mainly distributed in the grain boundary, but the αs phase is mainly in the β matrix after aging treatment. The hardness of the alloy under quenching plus aging is increased due to the growth of αs phase and the remarkable refining of αp phase in width.

    參考文獻
    相似文獻
    引證文獻
引用本文

盧金文,葛 鵬,趙永慶,李 磊,李 倩,周 偉.高溫形變熱處理對Ti-1300合金組織及硬度的影響[J].稀有金屬材料與工程,2015,44(3):676~680.[Lu Jinwen, Ge Peng, Zhao Yongqing, Li Lei, Li Qian, Zhou Wei. Effect of High Temperature Thermomechanical Treatment on Microstructure and Hardness of Ti-1300 Titanium Alloy[J]. Rare Metal Materials and Engineering,2015,44(3):676~680.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2014-03-15
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2015-05-29
  • 出版日期: