最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
Ti-Al二元系合金的表面張力
DOI:
作者:
作者單位:

重慶大學,重慶大學,重慶大學,重慶大學,重慶大學

作者簡介:

通訊作者:

中圖分類號:

基金項目:

the National Program on Key Basic Research Project (973 Program) (Project No. 2013CB632603)


The surface tension of liquid Ti–Al alloys
Author:
Affiliation:

Chongqing University,材料科學與工程學院,材料科學與工程學院,材料科學與工程學院,材料科學與工程學院

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用滴落法研究了在1758K條件下Ti-Al合金的表面張力。同時采用Butler模型和幾種改進的理想溶液模型理論計算Ti-Al合金表面張力。結果表明，Ti-Al合金的表面張力隨著Al含量的增加而減小，實驗結果和采用Butler模型以及改進理想溶液模型理論計算的結果相一致。Al原子主要分布在熔體的表面，而鈦由于具有高的表面張力主要分布在熔體的內部。同時也討論了表面活性元素硫?qū)i-Al合金表面張力的影響。結果表明硫?qū)辖鸨砻鎻埩τ绊懞艽?。隨著硫的增加，合金表面張力降低。硫在表面上的濃度高于內部。硫在Ti-Al合金中的吸附屬于正吸附。

    Abstract:

    The surface tension of liquid Ti-Al alloys at 1758 K was determined by the improved sessile drop method. The surface tension of liquid Ti-Al alloys were calculated using the Butler’s model and several modified ideal solution models. Results showed that the surface tension of liquid Ti-Al alloy decreases with increased Al concentration. Experimental results agree well with both the Butler’s model and the modified ideal solution model. The segregation of Al atoms to the surface occurs at all bulk concentrations of Ti-Al alloys. Al with lower surface tension prefers to segregate on the surface of liquid Ti-Al alloy, whereas Ti with higher surface tension prefers to segregate inside the molten alloy. The effect of surface active solute on the surface tension of liquid Ti-Al alloy was also discussed. Sulfur was found to have a larger effect on the surface tension of alloy. The surface tension of liquid Ti-Al alloy decreases with increased sulfur concentration. Sulfur concentration on the surface is higher than in the bulk. Thus, the adsorption of sulfur for Ti-Al alloys is a positive adsorption.

    參考文獻
    相似文獻
    引證文獻
引用本文

劉許旸,呂學偉,李春新,陳杰,白晨光. Ti-Al二元系合金的表面張力[J].稀有金屬材料與工程,2017,46(1):39~44.[LIUXUYANG, LVXUEWEI, LICHUNXIN, CHENJIE, BAICHENGUANG. The surface tension of liquid Ti–Al alloys[J]. Rare Metal Materials and Engineering,2017,46(1):39~44.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2014-10-23
  • 最后修改日期:2015-07-16
  • 錄用日期:2015-09-06
  • 在線發布日期: 2017-03-16
  • 出版日期: