最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
Research on the Hot Ductility of Fe-36Ni Invar Alloy
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Research on the Hot Ductility of Fe-36Ni Invar Alloy
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    通過Gleeble-3800熱模擬實驗機和微機控制萬能材料試驗機對Fe-36Ni因瓦合金的熱塑性進行了研究。結果表明:在1050~1200 ℃,由于動態再結晶出現,合金展現出了良好的熱塑性,這說明在熱加工過程中,終軋溫度不應低于1050 ℃。在800~1000 ℃時,F(xiàn)e-36Ni因瓦合金熱塑性較差,表現為脆性斷裂,晶界滑移是其主要斷裂機制。經氧化后,合金基體產生嚴重的內氧化,內氧化層由晶間氧化區和晶內氧化區組成。壓縮試驗表明,在變形過程中,晶間氧化會導致裂紋的產生,進而顯著惡化合金的熱塑性。

    Abstract:

    The hot ductility of Fe-36Ni invar alloy was studied by a Gleeble-3800 thermal-mechanical simulator and a microcomputer control universal material testing machine. The results show that the alloy has a good hot ductility (RA above 70%) at 1050~1200 °C, which illustrates that the alloy might be suitable for the rolling provided the finish rolling temperature does not go below 1050 °C. Dynamic recrystallization occurred and was found to be responsible for the better hot ductility. However, the alloy exhibits a hot ductility drop (RA below 50%) at 800~1000 °C, which is mainly attributed to the presence of the grain boundary sliding. Serious subscales, which had a typical substructure of the intragranular subscale and the intergranular subscale, occurred in the matrix after oxidation. The compression test indicates that the intergranular subscale will lead to the cracks and significantly deteriorate the hot ductility during deformation process.

    參考文獻
    相似文獻
    引證文獻
引用本文

于彥沖,陳偉慶,鄭宏光. Research on the Hot Ductility of Fe-36Ni Invar Alloy[J].稀有金屬材料與工程,2014,43(12):2969~2973.[Yu Yanchong, Chen Weiqing, Zheng Hongguang. Research on the Hot Ductility of Fe-36Ni Invar Alloy[J]. Rare Metal Materials and Engineering,2014,43(12):2969~2973.]
DOI:[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2013-12-21
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2015-04-16
  • 出版日期: