最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
Hot Deformation Behavior and Processing Map of SiCp/2024Al Composite
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Hot Deformation Behavior and Processing Map of SiCp/2024Al Composite
Author:
Affiliation:

Fund Project:

National Natural Science Foundation of China (51371077)

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用Gleeble-1500D熱模擬試驗機，對30%SiCp/2024A1復合材料在溫度為350～500 ℃、應變速率為0.01～10 s-1條件下進行熱壓縮試驗，研究該復合材料的熱變形行為與熱加工特征，建立熱變形本構方程和加工圖。結果表明，30%SiCp/2024A1復合材料的流變應力隨溫度升高而降低，隨應變速率增大而升高，說明該復合材料是一個正應變速率敏感的材料，其熱壓縮變形時的流變應力可采用Zener-Hollomon參數的雙曲正弦形式來描述，在本實驗條件下平均熱變形激活能Q為153.251 kJ/mol。為了證實其潛在的可加工性，對加工圖中的穩定區和失穩區進行標識，并通過微觀組織得到驗證。綜合考慮熱加工圖和顯微結構，變形溫度為450 ℃，應變速率為 1 s-1是復合材料適宜的熱變形條件。

    Abstract:

    The hot deformation behavior of 30%SiCp/2024 aluminum alloy composites was studied by hot compression tests using Gleeble-1500D thermo-mechanical simulator at the temperatures ranging from 350~500 ℃ under strain rates of 0.01~10 s-1. The true stress-true strain curves were obtained in the tests. Constitutive equation and processing map were established. The results show that the flow stress decreases with the increase of deformation temperature at a constant strain rate, and increases with the increase of strain rate at constant temperature, indicating that composite is a positive strain rate sensitive material. The flow stress behavior of composite during hot compression deformation can be represented by a Zener-Hollomon parameter in the hyperbolic sine form. Its activation energy for hot deformation Q is 153.251 kJ/mol. To demonstrate the potential workability, the stable zones and the instability zones in processing map were identified and verified through micrographs. Considering processing map and microstructure, the hot deformation should be carried out at the temperature of 450 ℃ and the strain rate of 1 s-1.

    參考文獻
    相似文獻
    引證文獻
引用本文

郝世明,謝敬佩,王愛琴,王文焱,李繼文. Hot Deformation Behavior and Processing Map of SiCp/2024Al Composite[J].稀有金屬材料與工程,2014,43(12):2912~2916.[Hao Shiming, Xie Jingpei, Wang Aiqin, Wang Wenyan, Li Jiwen. Hot Deformation Behavior and Processing Map of SiCp/2024Al Composite[J]. Rare Metal Materials and Engineering,2014,43(12):2912~2916.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2014-03-15
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2015-04-16
  • 出版日期: