最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
以石墨烯為碳源的硬質合金制備與性能研究
DOI:
作者:
作者單位:

北京工業大學,北京工業大學

作者簡介:

通訊作者:

中圖分類號:

基金項目:

“863”計劃主題項目（SS2013AA031401）；國家自然科學基金（51174009）；北京市自然科學基金重點項目（2131001）


A STUDY ON PREPARATION AND MECHANICAL PROPERTIES OF HARD METALS USING GRAPHENE AS CARBON SOURCE
Author:
Affiliation:

Beijing University of Technology,Beijing university of technology

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    以N-甲基吡咯烷酮分散的石墨烯代替常規的冶金炭黑作為碳源，采用短流程原位還原碳化反應制備出納米晶WC-Co復合粉末，石墨烯作為碳源可顯著降低原位還原碳化反應溫度，復合粉末粒徑細小且分布均勻。采用放電等離子燒結系統對復合粉末進行快速燒結致密化，得到平均晶粒尺寸為~290nm的超細晶硬質合金塊體材料，具有硬度值HV30為1387.7±13.1kg/mm2，斷裂韌性KIC值為8.3±0.1MPa?m1/2的良好力學性能，通過HRTEM觀測得到試樣中WC/WC晶界、WC/Co相界、WC/C相界具有很高的匹配度。

    Abstract:

    In the present work，normal carbon source black carbon was substituted by graphene which was dispersed in N-Methyl-2-pyrrolidone and was used to prepare nanocrystalline WC-Co composite powders using short process in-situ reduction and carbonization reaction method. The results show that graphene as carbon source could reduce reaction temperature, and the particles diameter of WC-Co composite powders distribute slightly. Composite powders were consolidated through spark plasma sintering system and the mean grain size of WC in WC-Co cemented carbides is about 290nm. Vickers hardness and fracture toughness of the bulk was 1387.7?3.1kg/mm2 and 8.3?.1MPa?m1/2. The interfaces between WC/WC, WC/Co and WC/C were studied through HRTEM images and had grain boundaries with low misfit.

    參考文獻
    相似文獻
    引證文獻
引用本文

王西龍,宋曉艷.以石墨烯為碳源的硬質合金制備與性能研究[J].稀有金屬材料與工程,2016,45(12):3262~3266.[wangxilong, Song Xiaoyan. A STUDY ON PREPARATION AND MECHANICAL PROPERTIES OF HARD METALS USING GRAPHENE AS CARBON SOURCE[J]. Rare Metal Materials and Engineering,2016,45(12):3262~3266.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2014-09-28
  • 最后修改日期:2015-02-03
  • 錄用日期:2015-03-25
  • 在線發布日期: 2017-02-06
  • 出版日期: