最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
不同速率定向凝固條件Mg-1.5Gd鎂合金的微觀結構及微觀偏析
DOI:
作者:
作者單位:

華電電力科學研究院,西北工業大學

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Microstructures and Microsegregation of Directionally Solidified Mg-1.5Gd Magnesium Alloy with Different Growth Rate
Author:
Affiliation:

China HuaDian Electric Power Research Institute,Northwestern Polytechnical University

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    本文研究了在定向凝固條件下凝固速率對Mg-1.5Gd鎂合金微觀結構的影響。試樣通過Bridgman定向凝固爐來制備，溫度梯度恒定為40K/mm，凝固速率為10-200μm/s。研究發現，Mg-1.5Gd鎂合金凝固組織為典型胞晶結構，通過線性擬合得到胞晶間距與凝固速率關系為：λ= 130.2827V-0.222，此結論與Trivedi模型擬合較好。通過Scheil模型進行熱力學凝固路徑計算，結合試驗觀察可以確定凝固組織為α(Mg)相和α(Mg) Mg5Gd二元共晶相。同時，通過Scheil模型計算所得的Gd元素的微觀偏析與EPMA測量結果基本一致。

    Abstract:

    Directional solidified Mg-1.5Gd (wt.%) magnesium alloy was carried out to investigate the effects of the growth rate on the microstructures under controlled solidification conditions. A Bridgman-type directional solidification furnace with liquid metal cooling (LMC) technology was used to solidify the specimens, which could provide steady state conditions with a constant temperature gradient (40K/mm) at a wide range of growth rate (10-200μm/s). The microstructures were observed to be cellular structures, and the relationship between cellular spacing (λ) and growth rate (V) was established in the form: λ= 130.2827V-0.2228 by using a linear regression analysis, which was in good agreement with the calculated values by Trivedi model. The thermodynamics solidification path calculations by Scheil model and experimental observations confirm that the solidification microstructure in the alloy consists of primary α(Mg) phase and binary eutectic α(Mg) Mg5Gd phase. Meanwhile, the microsegregation of the alloying element predicted by the Scheil model agrees reasonably with the electron probe microanalysis (EPMA) measurements.

    參考文獻
    相似文獻
    引證文獻
引用本文

王甲安,王甲賀.不同速率定向凝固條件Mg-1.5Gd鎂合金的微觀結構及微觀偏析[J].稀有金屬材料與工程,2017,46(1):12~16.[wangjiaan, wangjiahe. Microstructures and Microsegregation of Directionally Solidified Mg-1.5Gd Magnesium Alloy with Different Growth Rate[J]. Rare Metal Materials and Engineering,2017,46(1):12~16.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2014-09-17
  • 最后修改日期:2014-10-28
  • 錄用日期:2014-12-03
  • 在線發布日期: 2017-03-16
  • 出版日期: