最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
Effect of Isothermal Heat Treatment on Mechanical Properties of WC-17Co Coatings
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Effect of Isothermal Heat Treatment on Mechanical Properties of WC-17Co Coatings
Author:
Affiliation:

Fund Project:

Major Projects of National Science and Technology (2011zx04014-21)

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    利用超音速火焰噴涂技術在Ni718合金表面制備WC-17Co涂層,然后進行150 ℃/10 h,300 ℃/10 h和450 ℃/10 h恒溫?zé)崽幚?。利用納米壓痕和顯微壓痕的方法研究熱處理過程對涂層顯微硬度、彈性模量和斷裂韌性的影響,利用Almen試片曲率法計算試片中殘余應力的變化。結果表明,150,300和450 ℃的熱處理過程未對WC-17Co涂層的組織和結構特征造成顯著地影響;涂層的顯微硬度、彈性模量和斷裂韌性隨熱處理溫度的升高而降低;涂層機械性能隨溫度升高而降低的變化趨勢是由涂層殘余壓應力的變化特征引起的。

    Abstract:

    WC-17Co cermet coatings were deposited on Ni718 alloys using the high-velocity oxygen fuel (HVOF) technique. These coatings were then heat treated by different processes (150?°C, 10?h; 300?°C,?10?h; 450?°C,?10?h). The effects of heat treatment on microhardness, elasticity modulus, and fracture toughness were studied by an indentation method. The residual stresses of the coated specimens were evaluated by the Almen strip method. The results show that the phase constitution and the structure of the WC-17Co coatings exhibit no obvious change in 150, 300, and 450 °C heat-treatment. The microhardness, elasticity modulus, and fracture toughness of the WC-17Co coatings decrease with the increase of heat treatment temperature. The descent tendency of the mechanical properties is attributed to the decline in compressive residual stresses after isothermal heat treatment.

    參考文獻
    相似文獻
    引證文獻
引用本文

丁坤英,王立君,孫 振,劉延寬. Effect of Isothermal Heat Treatment on Mechanical Properties of WC-17Co Coatings[J].稀有金屬材料與工程,2014,43(10):2365~2369.[Ding Kunying, Wang Lijun, Sun Zhen, Liu Yankuan. Effect of Isothermal Heat Treatment on Mechanical Properties of WC-17Co Coatings[J]. Rare Metal Materials and Engineering,2014,43(10):2365~2369.]
DOI:[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2013-10-13
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2015-04-07
  • 出版日期: