最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
Dehydrogenation of Hydrogenated Ti-6Al-4V Alloy
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Dehydrogenation of Hydrogenated Ti-6Al-4V Alloy
Author:
Affiliation:

Fund Project:

National Defense Key Disciplines Laboratory of Light Alloy Processing Science and Technology, Nanchang Hangkong University (gf201101001); National Natural Science Foundation of China (51205102); China Postdoctoral Science Foundation (2012M511401)

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    對未置氫及置氫Ti-6Al-4V合金進行了TG/DSC試驗，研究了置氫鈦合金的除氫行為。結果表明，當溫度超過600 ℃時，置氫鈦合金的失重規律與未置氫鈦合金具有較大的差別。當加熱溫度在600~900 ℃之間時，置氫鈦合金的失重隨著氫含量的增加而增加。這是由于置氫合金中的亞穩相發生了分解。不考慮合金氧化的影響，置氫鈦合金的最大失重與合金中的氫含量一致。置氫鈦合金的最佳除氫溫度為750 ℃。對于不同氫含量的置氫鈦合金，其除氫工藝是相同的

    Abstract:

    TG/DSC tests of non-hydrogenated and hydrogenated Ti-6Al-4V alloys were carried out in order to investigate the dehydrogenation behavior of hydrogenated titanium alloys. Results indicate that mass losses of the hydrogenated Ti-6Al-4V alloys are significantly different with that of the non-hydrogenated Ti-6Al-4V alloy when the heating temperature is higher than 600 oC. Mass loss of the hydrogenated Ti-6Al-4V alloy increases with the increasing of hydrogen content when the heating temperature is in the range of 600 oC to 900 oC due to the decomposition of metastable phases. The maximum mass loss of the hydrogenated Ti-6Al-4V alloy is in correspondence with its hydrogen content upon no consideration of oxidation. The optimal dehydrogenation temperature among hydrogenated Ti-6Al-4V alloys is 750 oC. The dehydrogenation process for all hydrogenated Ti-6Al-4V alloys is the same

    參考文獻
    相似文獻
    引證文獻
引用本文

袁寶國,劉大海,李春峰. Dehydrogenation of Hydrogenated Ti-6Al-4V Alloy[J].稀有金屬材料與工程,2014,43(9):2104~2107.[Yuan Baoguo, Liu Dahai, Li Chunfeng. Dehydrogenation of Hydrogenated Ti-6Al-4V Alloy[J]. Rare Metal Materials and Engineering,2014,43(9):2104~2107.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2013-09-25
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2015-02-25
  • 出版日期: