最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
TC4-DT合金通過三重熱處理得到三態組織的研究
DOI:
作者:
作者單位:

南昌航空大學,南昌航空大學,南昌航空大學,南昌航空大學

作者簡介:

通訊作者:

中圖分類號:

TG166.5 & TG156.21

基金項目:

國家自然科學基金項目(面上項目,重點項目,重大項目)


The Study of the Process of TC4-DT Alloy Resulting in Tri-modal Structure through Triple Heat Treatment
Author:
Affiliation:

Nanchang HangKong University,Nanchang HangKong University,Nanchang HangKong University,Nanchang Hangkong University

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    研究了鈦合金TC4-DT在高溫熱變形后進行的三重熱處理對微觀組織的影響。結果表明:三重熱處理工藝中第一重溫度與第二重溫度影響著合金組織的中等軸α相的含量,伴隨著第一重溫度與第二重溫度的升高,等軸α相含量逐漸減少;將高溫變形后的組織通過940℃?h譝Q 920℃?h譝Q 820℃?.5h譇C熱處理可以得到三態組織,其中約含20%等軸α、50%~60%條狀α構成的網籃和β轉變基體;且條狀α相構成的網籃中,一次次生條狀α相間還含有更細小二次次生條狀α相,這種組織具有較小的縱橫比,各α集束交錯排列,細化了組織。

    Abstract:

    In this article, it studies the effect of TC4 - DT titanium alloy''s triple heat treatment on microstructur-e after thermal deformational at high temperature. It shows that the first temperature and the second temper-ature which in the triple heat treatment influenced the amount of alpha phase in alloy microstructure, m-oreover ,with the increasing of the first temperature and the second temperature, equiaxed alpha phase w-ould gradually decease. The tri-modal structure which results from 940℃?h WQ 920℃?h WQ 820℃?.5h AC, which consists of about 20% equiaxed alpha, 50%~60% basketweave formed by striature alpha and transformed beta matrix.Further more, there are smaller secondary strip alpha among first strip alpha in the basketweave which formed by striped alpha, the microstructure has a smaller aspect ratio and the alpha staggered cluster that refined the microstructure.

    參考文獻
    相似文獻
    引證文獻
引用本文

張貴華,董洪波,朱深亮,劉誠. TC4-DT合金通過三重熱處理得到三態組織的研究[J].稀有金屬材料與工程,2016,45(9):2454~2457.[zhangguihua, donghongbo, zhushenliang, liucheng. The Study of the Process of TC4-DT Alloy Resulting in Tri-modal Structure through Triple Heat Treatment[J]. Rare Metal Materials and Engineering,2016,45(9):2454~2457.]
DOI:[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2014-07-20
  • 最后修改日期:2014-09-03
  • 錄用日期:2014-09-28
  • 在線發布日期: 2016-10-09
  • 出版日期: