最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
型殼中央散熱對一種單晶高溫合金凝固組織與持久性能的影響
DOI:
作者:
作者單位:

沈陽黎明航空發動機(集團)有限責任公司

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金資助（項目號51202008），中國博士后科學基金（項目號2013M540037）


Effects of Ceramic Shell Mold with Central Heat Radiation on Solidification Microstructures and Stress Ruptre Property of a
Author:
Affiliation:

Shenyang Liming Aero-Engine (Group) Corporation Ltd, Shenyang 110043, China

Fund Project:

National Key Basic Research Development Planning (“973” Project) (2010CB731604)

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    單晶凝固過程中溫度場均勻性控制對單晶制備過程特別重要。本文以國內廣泛應用的第二代單晶高溫合金DD6為研究對象，研究型殼中央散熱對其凝固組織與持久性能的影響。結果表明，與合金中柱型殼相比，石墨中柱型殼能有效地改善單晶凝固過程中溫度場的均勻性，提高溫度梯度，有利于保持單晶凝固過程中熱流方向的平直。因此，石墨中柱型殼有利于降低一次枝晶間距，細化γ-γ’共晶相，減少單晶生長方向與[001]方向的角度差，使單晶高溫合金獲得較高的持久壽命。

    Abstract:

    The control of the temperature field during single crystal solidification has an important effect on single crystal growth. The present paper studied the influence of ceramic shell mold with central heat radiation on the microstructures and stress rupture property of the widely used DD6 single crystal superalloy. The results indicated that the mold with graphite center pillar could improve the uniformity of the temperature field and the temperature gradient during the solidification, and it could make the direction of heat flow more straight. As a result, the primary dendrite arm spacing decreased, the size and the volume fraction of γ-γ'' eutectic were reduced, the angle between the single crystal growth orientation and the [001] orientation decreased, so the single crystal superalloy can achieve longer stress rupture life.

    參考文獻
    相似文獻
    引證文獻
引用本文

樂獻剛.型殼中央散熱對一種單晶高溫合金凝固組織與持久性能的影響[J].稀有金屬材料與工程,2016,45(8):2057~2063.[Yue Xiangang. Effects of Ceramic Shell Mold with Central Heat Radiation on Solidification Microstructures and Stress Ruptre Property of a[J]. Rare Metal Materials and Engineering,2016,45(8):2057~2063.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2014-07-08
  • 最后修改日期:2014-08-07
  • 錄用日期:2014-09-28
  • 在線發布日期: 2016-10-09
  • 出版日期: