最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
熱處理對擠壓態Mg-9Sn-1.5Y-0.4Zr鎂合金顯微組織與力學性能的影響
DOI:
作者:
作者單位:

太原科技大學,太原科技大學,太原科技大學,太原科技大學

作者簡介:

通訊作者:

中圖分類號:

基金項目:

山西省科技攻關項目（20140321014-04）太原科技大學博士啟動基金（20122011）


Effects of heat treatment on microstructure and mechanical properties of as-extruded Mg-9Sn-1.5Y-0.4Zr magnesium alloy
Author:
Affiliation:

Taiyuan University of Science and Technology,Taiyuan University of Science and Technology,Taiyuan University of Science and Technology,Taiyuan University of Science and Technology

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    本文對熱處理對擠壓態Mg-9Sn-1.5Y-0.4Zr鎂合金顯微組織與力學性能的影響進行了實驗性探究。結果顯示熱處理對擠壓態Mg-9Sn-1.5Y-0.4Zr鎂合金顯微組織與力學性能具有顯著影響。擠壓態合金主要由非均勻分布的Mg2Sn相組成。經過495℃，10h固溶處理之后，大部分Mg2Sn相溶入到基體中。時效處理能大幅改善Mg-9Sn-1.5Y-0.4Zr合金的力學性能，最佳時效工藝為：在250℃條件下時效60h。實驗最終力學性能參數為：維氏硬度89HV，極限抗拉強度262MPa，屈服強度218MPa，延伸率10.4%?；趯?shí)驗結果分析，可以發現對于經時效處理的擠壓態Mg-9Sn-1.5Y-0.4Zr合金，沉淀強化是主要的強化因素（~51.76%）。

    Abstract:

    The effects of heat treatment on microstructure and mechanical properties of the as-extruded Mg-9Sn-1.5Y-0.4Zr (wt%) alloy were investigated experimentally in this study. The results showed that the heat treatment plays an important role on the microstructure and mechanical properties of the as-extruded Mg-9Sn-1.5Y-0.4Zr alloy. The as-extruded alloy is mainly composed of non-uniform Mg2Sn phase. After the solution treated at 495℃for 10h, a majority of the Mg2Sn phases in the alloy were dissolved into the matrix. Aging treatment can highly improve the mechanical properties of the Mg-9Sn-1.5Y-0.4Zr alloy with the optimized experimental condition of aging at 250℃for 60h after solution treated at 495℃for 10h. The corresponding mechanical property parameters are: hardness of 89HV, ultimate tensile strength of 262MPa, yield strength of 218MPa, elongation of 10.4%. Based on the experimental results analysis, it is found that the precipitation strengthening is the main contributor (~51.76%) to the total yield strength in the aged experimental alloy.

    參考文獻
    相似文獻
    引證文獻
引用本文

張代東,郝曉偉,房大慶,柴躍生.熱處理對擠壓態Mg-9Sn-1.5Y-0.4Zr鎂合金顯微組織與力學性能的影響[J].稀有金屬材料與工程,2016,45(9):2208~2213.[zhangdaidong, haoxiaowei, fangdaqing, chaiyuesheng. Effects of heat treatment on microstructure and mechanical properties of as-extruded Mg-9Sn-1.5Y-0.4Zr magnesium alloy[J]. Rare Metal Materials and Engineering,2016,45(9):2208~2213.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2014-06-24
  • 最后修改日期:2014-10-21
  • 錄用日期:2014-11-20
  • 在線發布日期: 2016-10-09
  • 出版日期: