最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
等離子體燒結制備TiNi合金的表征
DOI:
作者:
作者單位:

昆明理工大學,昆明理工大學,昆明理工大學,昆明理工大學,昆明理工大學,昆明理工大學,昆明冶金研究院

作者簡介:

通訊作者:

中圖分類號:

TG174.4

基金項目:

國家教育部博士點基金


Characterization of TiNi alloy prepared by spark plasma sintering
Author:
Affiliation:

Kunming University of Science and Technology,Kunming University of Science and Technology,Kunming University of Science and Technology,Kunming University of Science and Technology,Kunming University of Science and Technology,Kunming University of Science and Technology,Kunming Metallurgical Research Institute

Fund Project:

Natural Science Foundation of Yunnan Province (2009ZC027M); Innovation Fund of Science and Technology for Students (2012YA027)

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    將高能球磨制備的原子比為1:1的TiNi合金粉進行等離子體真空燒結。利用XRD,EDX和SEM對合金粉和燒結樣進行了成分與微觀形貌的表征，同時對燒結樣進行了硬度測試。實驗結果表明：球磨22h后TiNi粉呈非晶態粉末，球磨30h后的TiNi合金粉發生了明顯的固相反應，生成了TiNi, Ni3Ti ,Ti3Ni4等物相。等離子體燒結樣的物相是TiNi、Ni4Ti3、Ni3Ti和Ti2Ni，微觀結構主要是由2微米以下細晶粒組成，平均維氏硬度達到900Hv，自然時效1年后的平均維氏硬度達到680Hv，是常規電弧熔煉法制備的TiNi合金的2～5倍。

    Abstract:

    Atomic ratio of 1:1 TiNi alloy powder was prepared by high energy ball milling process, then sintered by plasma in vacuum. The TiNi alloy powder and TiNi sintered sample were used to characterize the composition and microstructure by XRD, EDS and SEM, the hardness of the sintered sample was tested. The experimental results show that the TiNi powder was amorphous form after 22h high energy ball milling, the solid state reactions obviously take place and the new phases,such as TiNi, ,Ti3Ni4 ,appear after 30h high energy ball milling. phases of the sintered sample phase are TiNi, Ni4Ti3,Ni3Ti and Ti2Ni, its microstructure is mainly composed of fine grain with size of less 2 micron, its average Vickers hardness is up to 900Hv, after one year natural aging, its average Vickers hardness is down to 680Hv. The hardness of TiNi alloy prepared by plasma sintering is 2 ~ 5 times of that prepared by arc melting method.

    參考文獻
    相似文獻
    引證文獻
引用本文

馬維剛,起華榮,馮中學,王效琪,史慶南,陳亮維,楊剛.等離子體燒結制備TiNi合金的表征[J].稀有金屬材料與工程,2016,45(7):1793~1797.[maweigang, Qihuarong, FengZhongxue, Wang xiao qi, Sh iQing nan, Chen Liang wei, Yang Gang. Characterization of TiNi alloy prepared by spark plasma sintering[J]. Rare Metal Materials and Engineering,2016,45(7):1793~1797.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2014-06-20
  • 最后修改日期:2014-12-29
  • 錄用日期:2015-01-13
  • 在線發布日期: 2016-10-09
  • 出版日期: