最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
Si含量及熱處理對Al-Si-Mg鋁合金焊絲堆焊層耐磨性的影響
DOI:
作者:
作者單位:

遼寧省沈陽市東北大學材料電磁過程教育部重點實驗室

作者簡介:

通訊作者:

中圖分類號:

基金項目:

Fundamental Research Funds for the Central Universities (No. N120309002) and (No. N130709001)


Effects of Si content and aging temperature on the wear resistance property of the surfacing layers welded with 4043 aluminum
Author:
Affiliation:

The Key Laboratory of the Ministry of Education of China for Electromagnetic Processing of Materials, Northeastern University

Fund Project:

the National Natural Science Foundation of China (51172147, 50702034); the Shenzhen Science and Technology Research(JC201005280437A)

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    4043鋁合金焊絲熔化后流動性良好，焊后不易產生結晶裂紋，廣泛適用于6000系鋁合金的焊接。使用4043鋁合金焊絲在材料表面堆焊，可以修復部分材料表面出現劃傷與磨損。本研究中，使用4043鋁合金焊絲，配合鎢極惰性氣體保護焊進行表面堆焊實驗，使用金相顯微鏡，掃描電鏡，硬度測試及耐磨性測試等分析檢測手段研究了Si含量及熱處理工藝對焊后堆焊層耐磨性的影響。結果表明，提高焊絲中Si含量可以增加共晶硅顆粒的數量。而熱處理可以有效球化共晶硅顆粒，顯著提高堆焊層的耐磨性。

    Abstract:

    4043 aluminum welding wire has been extensively used for welding 6000 series aluminum alloys due to the good flow ability of the fusion state and low cracking tendency during welding process. Some scratches and wear on the surface of aluminum structural components can be repaired by surface welding with the 4043 aluminum welding wires. In the present study, the influence of Si content and aging temperature on the wear resistance property of the surfacing layers welded by tungsten inert gas (TIG) welding using the 4043 aluminum welding wires has been analyzed by optical microscopy, scanning electron microscopy, hardness testing and abrasive wear testing. The results showed that increase in Si content increased the fraction of eutectic Si particles. The heat treatment spheroidized eutectic Si particles and further improved the wear resistance property of the surfacing layers.

    參考文獻
    相似文獻
    引證文獻
引用本文

徐振,趙志浩,韓東月,陳慶強,崔建忠. Si含量及熱處理對Al-Si-Mg鋁合金焊絲堆焊層耐磨性的影響[J].稀有金屬材料與工程,2016,45(1):71~74.[Xu Zhen, Zhao Zhihao, Han Dongyue, Chen Qingqiang, Cui Jianzhong. Effects of Si content and aging temperature on the wear resistance property of the surfacing layers welded with 4043 aluminum[J]. Rare Metal Materials and Engineering,2016,45(1):71~74.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2014-06-20
  • 最后修改日期:2014-07-04
  • 錄用日期:2014-08-12
  • 在線發布日期: 2019-01-04
  • 出版日期: