最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
Monel-400合金高溫力學性能及斷裂行為分析
DOI:
作者:
作者單位:

內蒙古科技大學,包鋼西北創業有限公司 包鋼設計研究院,內蒙古科技大學,內蒙古科技大學,內蒙古科技大學

作者簡介:

通訊作者:

中圖分類號:

TG142.7

基金項目:

國家科技重大專項子課題項目(2009ZX04014-064-05)；內蒙古科技大學材料與冶金學院青年人才孵化器平臺項目


Analysis of High Temperature Mechanical Properties and Fracture Behaviors on Monel-400 Alloy
Author:
Affiliation:

Inner Mongolia University of Science and Technology,Baogang Design & Research Institute, Baogang Northwest Venture Industrial Development Co., Ltd,Material and Metallurgy School, Inner Mongolia University of Science and Technology,Material and Metallurgy School, Inner Mongolia University of Science and Technology,Material and Metallurgy School, Inner Mongolia University of Science and Technology

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    利用Gleeble-1500D熱模擬機對不同溫度下的Monel-400合金及熔敷金屬進行拉伸試驗。試驗結果表明，母材和熔敷金屬在高溫下的強度不斷下降，母材的塑性隨溫度的升高而增大，熔敷金屬的塑性急劇下降。在高溫下，細小彌散的第二相粒子對熔敷金屬起到了明顯的強化作用，而熔敷金屬的塑性發生了嚴重劣化。母材從低溫到高溫(700~1100℃)的斷裂形式是韌性斷裂，熔敷金屬斷裂形式由韌性斷裂逐步變?yōu)榇嘈詳嗔?。在?shí)際熱加工和應用過程中，避免熔敷金屬發生大變形，防止產生加工熱裂紋，避免母材在700℃以上使用。

    Abstract:

    In order to investigate high temperature mechanical properties and fracture behaviors of Mone1-400 alloy and cladding metal tensile tests were conducted at different temperatures on a Gleeble-1500D thermal simulation machine. The results show that strength of base metal and cladding metal are declining from 700℃ to 1100℃. The plasticity of base metal increases with increasing temperature, while plasticity of the cladding metal declines. At 700℃, the dispersed second phase particles has played a significant role in strengthening the yield strength and tensile strength on the cladding metal, while plasticity of which is seriously deteriorated. At the range of 700 - 1100℃, the fracture pattern of base metal is ductile fracture, while fracture pattern of cladding metal from ductile fracture gradually become brittle fracture. In the actual thermal processing and application, it is crucial to avoid cladding metal large deformation to prevent thermal cracking, and the base metal should not be used above 700℃.

    參考文獻
    相似文獻
    引證文獻
引用本文

陳重毅,王文君,麻永林,邢淑清,陸恒昌. Monel-400合金高溫力學性能及斷裂行為分析[J].稀有金屬材料與工程,2016,45(7):1782~1787.[chenzhongyi, wangwenjun, mayonglin, xignshuqign, luhengchang. Analysis of High Temperature Mechanical Properties and Fracture Behaviors on Monel-400 Alloy[J]. Rare Metal Materials and Engineering,2016,45(7):1782~1787.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2014-06-19
  • 最后修改日期:2014-07-17
  • 錄用日期:2014-08-12
  • 在線發布日期: 2016-10-09
  • 出版日期: