最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
Preparation of Nickel-Based Alloy Closed-pore Hollow Spheres
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Preparation of Nickel-Based Alloy Closed-pore Hollow Spheres
Author:
Affiliation:

Fund Project:

National Key Natural Science Foundation of China (51134003); National Science and Technology Support Standard (2012BAC02B05)

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用3種不同粒度的鎳基合金粉，通過掛漿法結合粉末冶金工藝制備出壁厚為0.3~0.4 mm, 直徑為3~3.5 mm的金屬空心球結構。得出了漿料的最佳配比，粘接劑和粉末的質量比為1/2。測試了空心球結構的密度、孔隙度和壓縮強度，分析結果顯示隨著原始粉末粒度的減小，孔隙度減小，密度和抗壓強度增加。壓縮強度分別是16、18、28 MPa，實際相對抗壓強度僅為理論抗壓強度的50%。

    Abstract:

    Nickel-based alloy closed-pore hollow spheres were fabricated using three kinds of powders with different particle sizes by powder metallurgy process. The diameter of the sphere is about 3~3.5 mm and the wall thickness is 0.3~0.4 mm. The optimum slurry ratio is the liquid-solid ratio of 1/2. Some performances of metal hollow sphere (MHS) materials made of the powders with different particle sizes were discussed. The results show that the porosity decreases, density increases with the gradual decrease of particle size; in the meantime the compression strength of MHS increases from 16 to 18 MPa and then to 28 MPa, and actual relative compression strength value is only 50% of the theory value.

    參考文獻
    相似文獻
    引證文獻
引用本文

陳金妹,徐 磊,李亞寧,談 萍,皮艷霞,李 程. Preparation of Nickel-Based Alloy Closed-pore Hollow Spheres[J].稀有金屬材料與工程,2014,43(6):1308~1311.[Chen Jinmei, Xu Lei, Li Yaning, Tan Ping, Pi Yanxia, Li Cheng. Preparation of Nickel-Based Alloy Closed-pore Hollow Spheres[J]. Rare Metal Materials and Engineering,2014,43(6):1308~1311.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2013-11-14
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2014-11-13
  • 出版日期: