最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
合金元素對Ti-46Al-8Nb合金充型性能的影響
作者:
作者單位:

北京工業大學

作者簡介:

通訊作者:

中圖分類號:

TG146

基金項目:

國家自然科學基金項目（面上項目，重點項目，重大項目）


Effects of Alloy Elements on the Mold Filling Capacity of Ti-46Al-8Nb Alloy
Author:
Affiliation:

beijing university of technology

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用網狀式樣法制備包埋料型殼，對比研究了B、Y、Mn和Er等微合金元素對Ti-46Al-8Nb合金熔體鑄造充型性能的影響。研究結果表明：添加微量元素B、Y、Mn、Er等均會對Ti-46Al-8Nb合金熔體鑄造充型性能產生一定程度的改善作用。其中，0.5Y和1Mn改善作用十分明顯，其加入使充填率分別增加了54.5%和48.5%。0.1Er、0.5B和1B對該合金充型性能的改善作用較為一般，其加入使充填率分別增加了3.0%、4.5%和5.3%。

    Abstract:

    Embedded material shell was prepared using wax grid with 8? mesh. The effects of micro-alloy elements B, Y, Mn and Er on the mold filling capacity of Ti-46Al-8Nb melt were studied. The results showed that the fluidity and mold filling property of Ti-46Al-8Nb melt was improved to some extent by B, Y, Mn and Er addition. Especially, 0.5Y and 1Mn addition had significant improvement on the mold filling capacity of the alloy, which increased the filling rate by 54.5% and 48.5% respectively. The effect of 0.1Er, 0.5B and 1B addition on the mold filling capacity of the alloy was not so remarkable, with the filling rate increasing by 3.0%, 4.5% and 5.3% respectively.

    參考文獻
    相似文獻
    引證文獻
引用本文

周峰.合金元素對Ti-46Al-8Nb合金充型性能的影響[J].稀有金屬材料與工程,2019,48(9):2829~2834.[zhoufeng. Effects of Alloy Elements on the Mold Filling Capacity of Ti-46Al-8Nb Alloy[J]. Rare Metal Materials and Engineering,2019,48(9):2829~2834.]
DOI：10.12442/j. issn.1002-185X.20140394

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2014-04-14
  • 最后修改日期:2014-07-30
  • 錄用日期:2014-11-20
  • 在線發布日期: 2019-10-09
  • 出版日期: