最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
燒結溫度對Ti3AlC2/ZA27復合材料性能的影響
DOI:
作者:
作者單位:

北京交通大學

作者簡介:

通訊作者:

中圖分類號:

TB333

基金項目:

國家自然科學基金資助項目(項目號51172015)


Effects of sintering temperature on mechanical properties of Ti3AlC2/ZA27 composites
Author:
Affiliation:

Beijing Jiaotong University

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    以Ti3AlC2粉和鋅鋁合金ZA27粉作為原料,采用行星球磨混料加氣氛保護燒結工藝制備了Ti3AlC2顆粒增強ZA27復合材料,重點研究了燒結溫度對復合材料的相組成、力學性能和顯微組織結構的影響。結果表明隨燒結溫度的升高,復合材料的相對密度、維氏硬度、抗彎強度和抗拉強度都增大, 且在870?C時抗彎強度和抗拉強度都達到最大值,分別為592MPa和324MPa。該溫度下Ti3AlC2與ZA27之間發生了微弱的化學反應,有利于改善基體與顆粒增強相之間的界面結合效果。

    Abstract:

    A series of Ti3AlC2/ZA27 composites have been successfully synthesized by mechanical alloying and pressureless sintering, which use the mixed powder of Ti3AlC2 and ZA27 as raw material. The effects of sintering temperature on composition, microstructure and mechanical property were investigated. The results showed that the relative density, Vickers hardness, bending strength and tensile strength were improved with increasing sintering temperature from 600?C to 870?C. Both the bending strength and tensile strength reached the maximum values of 592 MPa and 324MPa, respectively, at the temperature of 870?C. A weak reaction between Ti3AlC2 and ZA27 took palce at 870?C and led to the good bonding between the reinforcements and the matrix.

    參考文獻
    相似文獻
    引證文獻
引用本文

李海燕,周洋.燒結溫度對Ti3AlC2/ZA27復合材料性能的影響[J].稀有金屬材料與工程,2016,45(1):212~216.[lihaiyan, zhouyang. Effects of sintering temperature on mechanical properties of Ti3AlC2/ZA27 composites[J]. Rare Metal Materials and Engineering,2016,45(1):212~216.]
DOI:[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2014-02-24
  • 最后修改日期:2014-03-22
  • 錄用日期:2014-04-15
  • 在線發布日期: 2019-01-04
  • 出版日期: