最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
TC18鈦合金熱壓縮本構方程及熱加工圖
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

“十二五”重大專項課題(2012ZX04010-081)


Constitutive Equation and Processing Map of Thermal Deformation for TC18 Titanium Alloy
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    在溫度為750~950 ℃、應變速率為0.01~10 s-1、變形程度為60%的條件下對TC18鈦合金的高溫流變應力變化規律進行熱模擬實驗研究。采用Arrhenius雙曲正弦函數推導出TC18本構方程。以熱模擬壓縮實驗為基礎建立了真應變0.3、0.5時TC18鈦合金熱加工圖。結果表明：TC18鈦合金流變應力隨著變形溫度升高而降低，隨著應變速率的升高而升高；在本實驗條件下 TC18鈦合金表現出動態回復和動態再結晶兩種軟化機制；Arrhenius雙曲正弦函數能夠很好地描述TC18鈦合金本構方程。熱加工圖結果表明：在真應變?yōu)?.3時存在3個非穩定區域，在應變?yōu)?.5時存在2個非穩定區域。結合熱加工圖，較佳的熱加工區間在溫度為830~920 ℃，應變速率為0.01~0.32 s-1區域內

    Abstract:

    The changing rules of flow stress at high temperatures for TC18 titanium alloy were studied by thermal simulation experiment, in temperature ranging from 750 to 950 ℃, at strain rate from 0.01 to 10 s-1 and the deformation degree of 60%. The constitutive equation of TC18 Ti alloy was derived through Arrhenius hyperbolic sine function. According to the experimental results, the processing maps of TC18 Ti alloy were developed for strain of 0.3 and 0.5. The results show that flow stress of TC18 titanium alloy decreases with the increase of deformation temperature and the decrease of strain rate. Under the experimental conditions, TC18 titanium alloy shows two kinds of softening mechanism of dynamic recovery and recrystallization. Arrhenius hyperbolic sine function can well describe the constitutive equation of the TC18 titanium alloy. The result of processing map shows that three unsteady zones of high temperature deformation appear on the process map at strain of 0.3. The two unsteady zones of high temperature deformation appear on the process map at strain of 0.5. From the processing maps, better thermal processing interval is in a temperature of 830 ~ 920 ℃ and at strain rate of 0.01~0.32 s-1 region

    參考文獻
    相似文獻
    引證文獻
引用本文

曲鳳盛,周 杰,劉旭光,莫安軍,高 林. TC18鈦合金熱壓縮本構方程及熱加工圖[J].稀有金屬材料與工程,2014,43(1):120~124.[Qu Fengsheng, Zhou Jie, Liu Xuguang, Mo Anjun, Gao Lin. Constitutive Equation and Processing Map of Thermal Deformation for TC18 Titanium Alloy[J]. Rare Metal Materials and Engineering,2014,43(1):120~124.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2013-01-17
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2014-04-16
  • 出版日期: