最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

The effects of electric pulse heat treatment performed by SPS equipment on mechanical properties and the susceptibility to adiabatic shear bands of hot-rolled TC4 alloy were systematically studied. The results show that electric pulse heat treatment has little effect on the strength and ductility of TC4 at the static compression loading,and it also has little effect on the yielding strength at the dynamic compression loading, but the heat treatment has evidently effects on the susceptibility to adiabatic shear bands of the hot-rolled TC4.After electric pulse heat treatment at 900℃, TC4 alloy exhibits the highest adiabatic shear failure strain under the dynamic compression loading and the highest energy absorption of unit volume before fracture. Compared with the hot-rolled TC4 alloy, the adiabatic shear failure strain of heat -treated TC4 increases by 57% and the energy absorption of unit volume increases by 42%, indicating that the susceptibility to adiabatic shear bands of TC4 is significantly decreased. The microstructure analysis results show that electric pulse heat treatment has obviously influences on the prior β grain size and the detailed microstructure characteristics of TC4. After the heat treatment at 900℃, the oprior β grain size shows decreasing tendency, while the transformed β colony size shows increasing tendency, but the width of α plate shows no change.