最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
熱機械加工對2099鋁鋰合金擠壓材組織與抗腐蝕性能的影響
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

江蘇省工業科技支撐計劃項目(BE2008118)；江蘇大學“拔尖人才培養工程”基金(1211110001)


Effect of Thermo-Mechanical Processing on Microstructure and Corrosion Resistance of 2099 Al-Li Alloy Extrusions
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用金相組織觀察、XRD分析、硬度和導電率測試等手段，研究了熱機械加工(Thermo-Mechanical Processing, TMP)對2099鋁鋰合金擠壓材組織、硬度、導電率、晶間腐蝕及剝落腐蝕性能的影響。結果表明：與經T83 (540 ℃/2 h固溶、3%預壓縮、121 ℃/14 h + 181 ℃/48 h時效)熱處理的2099鋁鋰合金擠壓材相比，經TMP(540 ℃/2 h固溶、400 ℃/48 h過時效、約50%大應變變形、540 ℃/2 h再結晶/固溶)+(121 ℃/14 h + 181 ℃/48 h時效)處理的2099鋁鋰合金擠壓材發生了明顯的再結晶，硬度（HV）降低(從2006.2 MPa到1865.3 MPa)，位錯強化亦降低，但導電率和抗晶間腐蝕性能明顯提高，同時抗剝落腐蝕性能也有所提高。結果表明，熱機械加工是不顯著降低2099鋁鋰合金擠壓材硬度，但顯著提高其抗晶間腐蝕性能的有效途徑

    Abstract:

    The effects of Thermo-Mechanical Processing(TMP) on microstructure, hardness, electricity, intergranular and exfoliation corrosion resistance of extruded 2099 Al-Li alloy were investigated by microstructure observation, XRD analysis, hardness and electric conductivity testing. The results show that compared with the extruded 2099 Al-Li alloy after T83 heat treatment (540 °C/2 h solid solution, 3% pre-compression, 121 °C/14 h + 181 °C/48 h aging), the samples after TMP (540 °C/2 h solid solution, 400 °C/48 h overaging, about 50% large strain deformation, 540 °C/2 h solid solution)+(121 °C/14 h + 181 °C/48 h aging) recrystallize obviously. The HV hardness is a little lower(2006.2 MPa vs 1865.3 MPa) and so is dislocations strengthening. The electric conductivity and the intergranular corrosion resistance are improved significantly and the exfoliation corrosion resistance is also enhanced. This study shows that TMP is an effective method to improve the intergranular resistance with the hardness not greatly reduced

    參考文獻
    相似文獻
    引證文獻
引用本文

張振強,許曉靜,宋 濤,張允康,羅 勇,吳 瑤,鄧平安.熱機械加工對2099鋁鋰合金擠壓材組織與抗腐蝕性能的影響[J].稀有金屬材料與工程,2013,42(12):2619~2624.[Zhang Zhenqiang, Xu Xiaojing, Song Tao, Zhang Yunkang, Luo Yong, Wu Yao, Deng Ping’an. Effect of Thermo-Mechanical Processing on Microstructure and Corrosion Resistance of 2099 Al-Li Alloy Extrusions[J]. Rare Metal Materials and Engineering,2013,42(12):2619~2624.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2012-12-13
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: