最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
TC4合金與SiO2復合材料釬焊接頭界面結構及性能
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金資助（51174066）


Research on the Interfacial Structure and Mechanical Properties of TC4 - SiO2 Composite Brazed Joint
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用AgCu-4.5Ti釬料直接釬焊TC4鈦合金與SiO2復合材料，研究了接頭界面組織結構及形成機理，分析了不同工藝參數下界面變化對接頭抗剪強度的影響。研究表明：接頭界面典型結構為SiO2復合材料/TiSi2/Cu4Ti3+Cu3Ti3O/ Ag(s,s)+Cu(s,s)/TiCu/Ti2Cu/α，β-Ti/TC4；釬焊溫度的升高可促進兩側母材界面反應層厚度的增加，同時釬縫中部的AgCu共晶組織消失，化合物相增多；隨著接頭界面結構的變化，接頭抗剪強度表現出先升高后降低的趨勢：當釬焊溫度為850 ℃，保溫10 min時，接頭室溫最高抗剪強度達到7.8 MPa

    Abstract:

    The TC4 alloy was brazed to SiO2 composite using AgCu-4.5Ti filler alloy. The interfacial microstructure of joint was analysed and its formation mechanism was discussed. The influence of brazing temperature on the interfacial microstructure and the shear strength of joints was studied. The typical interfacial microstructure was SiO2 composite/TiSi2/Cu4Ti3+Cu3Ti3O/Ag(s, s)+Cu(s, s)/TiCu/Ti2Cu/α, β-Ti/TC4 alloy at brazing temperature 850 ℃, for 10 min. The increase of brazing temperature would increase the thickness of interfacial reaction layers near SiO2 composite and TC4 alloy, and the AgCu eutectic microstructure would disappear at 870 °C. The shear strength of joint also changes with the increase of temperature. The shear strength of the joints reaches a maximum of 7.8 MPa when the temperature is 850 °C and the holding time 10 min

    參考文獻
    相似文獻
    引證文獻
引用本文

張俊杰,張麗霞,亓鈞雷,張大磊,馮吉才. TC4合金與SiO2復合材料釬焊接頭界面結構及性能[J].稀有金屬材料與工程,2013,42(12):2598~2601.[Zhang Junjie, Zhang Lixia, Qi Junlei, Zhang Dalei, Feng Jicai. Research on the Interfacial Structure and Mechanical Properties of TC4 - SiO2 Composite Brazed Joint[J]. Rare Metal Materials and Engineering,2013,42(12):2598~2601.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2012-12-19
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: