最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
Effects of Ti on the Brazability of Zn-22Al-xTi Filler Metals as Well as Properties of Cu/Al Brazing Joints
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Effects of Ti on the Brazability of Zn-22Al-xTi Filler Metals as Well as Properties of Cu/Al Brazing Joints
Author:
Affiliation:

Fund Project:

Project of Scientist and Technician Serve the Enterprise, MOST, China (2009GJC20040)

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    設計并采用Zn-Al-Ti系列釬料對Cu和Al異種金屬實施了釬焊，并對Zn-22Al-xTi/Cu界面處的相組成和金屬間化合物形貌進行了分析。結果表明：在Zn-22Al中添加0.01%至0.05%的Ti可以顯著細化釬料組織，而且Zn-22Al-0.03Ti在Cu基板上的鋪展面積比Zn-22Al高出60.4%，但Ti的添加會提高Zn-22Al釬料的熔點和熔化區間。另外，在釬料中添加微量的Ti可以優化Cu/Al接頭中Cu側界面化合物的組織并減小其厚度。相比Zn-22Al釬料，Zn-22Al-0.03Ti釬焊所得Cu/Al接頭強度要高出13.4%，而且接頭斷裂位置由化合物層轉移至釬料內部。X射線衍射結果顯示，釬焊過程中有CuAl2，Cu9Al4，CuZn 3種化合物產生于釬料與Cu基板界面處

    Abstract:

    Noval Zn-Al-Ti filler metals have been designed and used to braze Cu and Al dissimilar metals. The phase constitutions and morphologies of intermetallic compounds at the Zn-22Al-xTi/Cu interfaces were studied in this paper. The results indicate that, with Ti addition from 0.01 wt% to 0.05 wt%, the microstructure of the Zn-22Al alloy are refined significantly. The spreading area of Zn-22Al-0.03Ti on Cu substrates increases by 60.4% compared with that of ZA. However, the melting range and melting point of the Zn-22Al-xTi alloys also increase with the addition of Ti. In particular, the addition of trace Ti into the Zn-22Al filler metal can refine the microstructures and decrease the thickness of the intermetallic compounds layer produced in the Cu/Al brazing. The shear strength of Cu/Al joint brazed with Zn-22Al-0.03Ti is 13.4% higher than that of the Zn-22Al filler metal, and the fracture position changes from the interface layer to the matrix of the filler metals. The X-ray diffraction result indicates that the CuAl2, CuZn, and Cu9Al4 phases are produced at the filler metal/Cu substrate interface

    參考文獻
    相似文獻
    引證文獻
引用本文

姬 峰,薛松柏,戴 瑋. Effects of Ti on the Brazability of Zn-22Al-xTi Filler Metals as Well as Properties of Cu/Al Brazing Joints[J].稀有金屬材料與工程,2013,42(12):2453~2457.[Ji Feng, Xue Songbai, Dai Wei. Effects of Ti on the Brazability of Zn-22Al-xTi Filler Metals as Well as Properties of Cu/Al Brazing Joints[J]. Rare Metal Materials and Engineering,2013,42(12):2453~2457.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2012-12-25
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: