最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
燒結溫度對Ni16Cr9Al多孔材料性能的影響
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Effect of Sintering Temperature on Ni16Cr9Al Porous Material Performance
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    以粒度小于25 μm的Ni16Cr9Al預合金粉末為原料，采用模壓成形、真空燒結的方法制備了Ni16Cr9Al多孔材料，研究了燒結溫度對Ni16Cr9Al多孔材料性能的影響。結果表明：Ni16Cr9Al粉末壓坯在燒結過程中由于燒結頸的形成、長大，體積發生收縮，隨著溫度的升高，燒結體的孔隙度和孔徑減小，強度提高，1130 ℃具有良好的三維孔隙結構，高于1150 ℃，孔隙減少，材料逐漸致密

    Abstract:

    Using Ni16Cr9Al pre-alloy powder with ＜25 μm particles size as starting material, Ni16Cr9Al porous material was prepared by pressing and vacuum sintering. The effect of sintering temperature on Ni16Cr9Al porous material performance was researched. The results show that the shrinkage of the volume of Ni16Cr9Al green body will occur owing to forming and growing up of sintering-neck during the sinter. The porosity, the maximum and average pore sizes decrease and the shear strength of the Ni16Cr9Al porous materials increases with the increase of the sintering temperature. The Ni16Cr9Al porous material possesses a favorable three-dimensional meshwork after sintering at 1130 ℃. The porosity quantity decreases and the density of the Ni16Cr9Al material gradually increases after sintering over 1150 ℃

    參考文獻
    相似文獻
    引證文獻
引用本文

康新婷,遲煜頔,劉海彥,沈 磊,王 輝,葛 淵.燒結溫度對Ni16Cr9Al多孔材料性能的影響[J].稀有金屬材料與工程,2013,42(11):2380~2383.[Kang Xinting,,Chi Yudi, Liu Haiyan, Shen Lei, Wang Hui, Ge Yuan. Effect of Sintering Temperature on Ni16Cr9Al Porous Material Performance[J]. Rare Metal Materials and Engineering,2013,42(11):2380~2383.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2013-05-14
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: