最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
W-Ni-Fe合金藥型罩的破甲特性
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Penetration Performance of W-Ni-Fe Alloy Shaped Charge Liner
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    為了研究W-Ni-Fe合金藥型罩的射流特征及破甲特性，對W-Ni-Fe合金藥型罩進行靜破甲試驗，采用X射線照相系統研究W-Ni-Fe合金藥型罩的射流形成能力，并對侵徹后的靶板進行宏觀及微觀分析。結果表明，W-Ni-Fe合金藥型罩能形成高速延性射流，雖然穿深較低但破孔孔徑大。靶板微觀分析表明，破孔表面射流殘余多且形成了高硬馬氏體區。XRD結果表明，射流與鋼靶相互作用劇烈，在破孔表面形成了大量Fe0.95W0.05化合物。馬氏體及化合物硬質相的存在使得射流能量橫向耗散嚴重，這是造成W-Ni-Fe合金藥型罩穿深低、破孔大的主要原因

    Abstract:

    In order to study the jet and penetration performance of W-Ni-Fe alloy shaped charge liner (SCL), the W-Ni-Fe alloy SCL was subjected to static penetration experiments. The X-ray imaging system was used to study the jet forming ability. The macroscopic and microscopic phenomenon of targets was investigated. Results show that W-Ni-Fe alloy SCL can form ductility jet and the jet velocity is high, although penetration is lower, and the hole diameter is large. The microscopic analysis result shows that there is much residual jet on the surface of bullet hole and high hardness martensite is formed. The XRD result shows that the interaction is very severe between jet and steel target, and in the meantime much Fe0.95W0.05 compound is formed. The low penetration and large hole diameter about W-Ni-Fe alloy SCL is a main result of severe transverse energy dissipation of jet which is caused by martensite and intermetallic

    參考文獻
    相似文獻
    引證文獻
引用本文

呂翠翠,劉金旭,李樹奎,郭文啟,白 曦. W-Ni-Fe合金藥型罩的破甲特性[J].稀有金屬材料與工程,2013,42(11):2337~2340.[Lü Cuicui, Liu Jinxu, Li Shukui, Guo Wenqi, Bai Xi. Penetration Performance of W-Ni-Fe Alloy Shaped Charge Liner[J]. Rare Metal Materials and Engineering,2013,42(11):2337~2340.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2012-11-06
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: