最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
多孔鈀塊體材料的制備及其表面處理
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

表面物理與化學國家重點實驗室開放基金資助(SPC200701); 四川省教育廳科研基金(12ZB173)


Preparation and Surface Treatment of Porous Palladium Bulk
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用等離子脈沖放電燒結(SPS)法制備多孔鈀塊體材料，并對其進行表面氧化還原處理。結果表明：采用該方法在550 ℃時可以制備出結構穩定性與力學性能好、孔隙率高(87.88%)的多孔鈀塊材。此種多孔鈀塊材在通過氧化還原處理以后，其表面碳雜質含量能夠得到有效降低，表面粗糙度與表面積能夠得到一定程度的提高

    Abstract:

    Porous palladium (Pd) bulk was prepared by spark plasma sintering (SPS). Afterwards oxidation and deoxidation on the surface of the porous Pd bulk was conducted in the temperature range of 500~600 °C. The microstructure, surface area, porosity and pore size distribution were investigated. The microstructure and chemical composition of the porous Pd bulk surface were characterized by SEM and XPS. The results show that porous Pd bulk with excellent mechanical properties and higher porosity (87.88%) can be prepared by SPS at 550 °C. Carbonaceous impurities on the porous Pd bulk surface can be removed and the surface area of porous Pd bulk as well as the roughness can be increased by oxidation and deoxidation reactions

    參考文獻
    相似文獻
    引證文獻
引用本文

馮 威,劉 穎,連利仙,彭麗霞,朱曉東.多孔鈀塊體材料的制備及其表面處理[J].稀有金屬材料與工程,2013,42(5):1071~1074.[Feng Wei, Liu Ying, Lian Lixian, Peng Lixia, Zhu Xiaodong. Preparation and Surface Treatment of Porous Palladium Bulk[J]. Rare Metal Materials and Engineering,2013,42(5):1071~1074.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2012-05-16
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: