最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
Spread Model for TC4 Alloy Rod during the Three-Roll Tandem Rolling Process
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Spread Model for TC4 Alloy Rod during the Three-Roll Tandem Rolling Process
Author:
Affiliation:

Fund Project:

Province Young Research Program of Shanxi (2010021024-1); “973” Plan Preliminary Study Program(2011CB612204); Postgraduate Innovation Program of Shanxi (20113114).

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    為了保證三輥連軋過程中棒材的成型精度，研究了TC4鈦合金棒材的寬展。采用正交試驗優化設計方法設計數值模擬方案，在Marc有限元平臺上，研究軋制工藝參數（軋制溫度、軋制速度、孔型內切圓直徑、軋輥直徑、摩擦系數）對寬展的影響，并分析了各參數的影響顯著性順序。在此基礎上，建立了三輥軋制TC4棒材的寬展模型。試驗在自行研制的8機架Y型連軋機上進行，孔型系統為平三角-圓。寬展測量結果和模型計算結果吻合較好

    Abstract:

    In order to get high-precision TC4 alloy rod during the three-roll tandem rolling process, the spread of rod has been studied. A numerical simulation project was designed by an orthogonal experiment optimization design method. On the FEM software platform of Marc, the influence of rolling process parameters, including the rolling temperature, the rolling velocity, the inscribed circle of pass, the diameter of roller, and the friction coefficient between roller and rod, on the spread was investigated. Moreover, the effect order of above parameters was analyzed. On this basis, the spread model for TC4 alloy rod during three-roll rolling was established. The experiment was done on the self-developed three-roll mill of eight passes with a flat triangle-round sequence. The calculated results of spread model are in good agreement with the on-site data

    參考文獻
    相似文獻
    引證文獻
引用本文

帥美榮,黃慶學,朱艷春,潘 露. Spread Model for TC4 Alloy Rod during the Three-Roll Tandem Rolling Process[J].稀有金屬材料與工程,2013,42(5):909~913.[Shuai Meirong, Huang Qingxue, Zhu Yanchun, Pan Lu. Spread Model for TC4 Alloy Rod during the Three-Roll Tandem Rolling Process[J]. Rare Metal Materials and Engineering,2013,42(5):909~913.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2012-05-15
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: