最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
不同工藝制備的TiAl金屬間化合物微觀組織特征
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Microstructural Characters of TiAl Intermetallics Prepared with Different Processes
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    使用機械球磨制備細晶Ti/Al復合粉，采用不同的壓制工藝，通過反應燒結和等溫鍛造方法獲得不同晶粒尺寸的TiAl金屬間化合物。對TiAl金屬間化合物的微觀組織特征進行了分析，研究了不同制備工藝對其微觀組織的影響。 結果表明：采用冷等靜壓630 ℃反應燒結及等溫鍛造工藝可以獲得晶粒尺寸5~8 μm的細晶TiAl金屬間化合物；通過普通冷壓、1250 ℃反應燒結與等溫鍛造后，也能獲得近全致密的層片狀TiAl金屬間化合物，但晶粒尺寸為20~30 μm。

    Abstract:

    Fine-grain Ti/Al composite powder was prepared by mechanical alloying. TiAl intermetallics with various grain sizes were prepared by different compacting methods and reaction sintering as well as isothermal forging. The microstructural characters of TiAl alloys were analyzed. The effects of different processes on microstructures of TiAl intermetallics were studied. The results indicate that the processing of cold isostatic pressing, reaction sintering at 630 oC and isothermal forging can effectively reduce the grain size of Ti/Al alloys, and the grain size of the TiAl intermetallics is between 5 and 8 μm. The lamellar TiAl intermetallics, which are nearly fully dense, can also be obtained by common cold pressing, reaction sintering at 1250 oC and isothermal forging, but the grain size is 20~30 μm.

    參考文獻
    相似文獻
    引證文獻
引用本文

喻吉良,李中奎,鄭 欣,韓文波.不同工藝制備的TiAl金屬間化合物微觀組織特征[J].稀有金屬材料與工程,2012,41(11):2054~2057.[Yu Jiliang, Li Zhongkui, Zheng Xin, Han Wenbo. Microstructural Characters of TiAl Intermetallics Prepared with Different Processes[J]. Rare Metal Materials and Engineering,2012,41(11):2054~2057.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2011-11-23
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: