最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
TiAl與Ni基合金接觸反應釬焊接頭界面組織及性能
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

中央高校基本科研業務費專項資金 (HIT.BRET1.2010006，HIT.NSRIF.2010119)；國家自然科學基金（51021002，E050803）


Interfacial Structure and Properties of Reactive Brazing Joints of TiAl/Ni-based Alloy
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    以Ti為中間層實現了TiAl與Ni基合金的接觸反應釬焊。采用掃描電鏡和電子探針等手段對釬焊接頭的界面結構及生成相進行分析，并對接頭剪切強度進行測試。結果表明：當釬焊溫度為960 ℃時，釬縫主要由Tiss和Ti2Ni組成；當釬焊溫度從960 ℃升高到1000 ℃時，釬縫中生成Ti-Al及Al-Ni-Ti化合物，典型界面結構為：GH99/(Ni,Cr)ss/Ti2Ni+AlNi2Ti+TiNi/Ti3Al+Al3NiTi2/Ti3Al+Al3NiTi2/TiAl；釬焊溫度繼續升高，Ti3Al和Al3NiTi2變得粗大，導致接頭性能下降。當釬焊溫度為1000 ℃，保溫10 min時，接頭剪切強度達到最大值233 MPa。隨釬焊溫度的升高，釬縫厚度先增加后減小。

    Abstract:

    TiAl alloy and Ni-based alloy were joined by vacuum reactive brazing using Ti foil as the interlayer. Interfacial microstructure and formation phases of the brazed joint were investigated by means of scanning electron microscope and electron probe microanalysis, and shear strength of the joint was determined. The results show that the brazed joint is mainly composed of Tiss and Ti2Ni when brazed at 960 °C; when the brazing temperature increases from 960 °C to 1000 °C, Ti-Al and Al-Ni-Ti compounds form in the brazing seam and the typical interface structure of the brazed joint is GH99/(Ni,Cr)ss/Ti2Ni+AlNi2Ti+TiNi/Ti3Al+Al3NiTi2/Ti3Al+Al3NiTi2/TiAl. Further increasing the brazing temperature results in excessive growth of Ti3Al and Al3NiTi2 phase, which reduces the joining properties. The shear strength of the joint reaches a maximum of 233 MPa when brazed at 1000 oC for 10 min. With the brazing temperature increasing, the thickness of the brazing seam increases firstly and then decreases.

    參考文獻
    相似文獻
    引證文獻
引用本文

李海新,林鐵松,何 鵬,王顯軍,馮吉才. TiAl與Ni基合金接觸反應釬焊接頭界面組織及性能[J].稀有金屬材料與工程,2012,41(11):1945~1949.[Li Haixin, Lin Tiesong, He Peng, Wang Xianjun, Feng Jicai. Interfacial Structure and Properties of Reactive Brazing Joints of TiAl/Ni-based Alloy[J]. Rare Metal Materials and Engineering,2012,41(11):1945~1949.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2011-11-08
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: