最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
旋轉摩擦擠壓合金化法制備Al3Ti金屬間化合物
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金（50674056）


Al3Ti Intermetallic Compounds Fabricated by Rotational Extrusion Alloying
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用自制旋轉摩擦擠壓合金化設備以純鋁板和純Ti粉為原材料制備了Al-Ti金屬間化合物。利用掃描電子顯微鏡、能譜儀、透射電子顯微鏡以及X射線衍射儀對合金化產物的微觀組織結構及相組成進行了分析，并對其顯微硬度進行了測量。結果表明：原材料Al、Ti在摩擦棒的剪切與強烈擠壓力的共同作用下，能夠在固態下發生合金化反應，生成Al3Ti金屬間化合物相，其晶粒尺寸約為500 nm，且基體鋁中的位錯較多，呈卷曲無規則排列狀態。合金化產物平均硬度值HV達到1080 MPa，為原始純鋁硬度的4倍。

    Abstract:

    The Al3Ti intermetallic compound was fabricated with pure Ti powder and aluminum plate as starting materials by self-developed rotational extrusion equipment. The microstructure of the rotational extrusion alloyed product was observed with scanning electron microscopy and energy dispersive spectrometry, the phase constituent of alloying product was inspected by transmission electron microscopy and X-ray diffraction, and the microhardness was measured. The results show that under the interaction effect of the friction stick shearing and extrusion force, the Ti-Al intermetallic compounds can be synthesized by alloying reaction, and the product is Al3Ti phase intermetallic compound. The size of Al3Ti particles is about 500 nm, and the matrix of aluminum presents a large number of dislocations, which are irregular arrangement of curly state. The average microhardness of alloyed product is 1080 MPa, four times that of matrix.

    參考文獻
    相似文獻
    引證文獻
引用本文

黃科輝,柯黎明,邢 麗,陳玉華,黃春平.旋轉摩擦擠壓合金化法制備Al3Ti金屬間化合物[J].稀有金屬材料與工程,2011,40(10):1812~1816.[Huang Kehui, Ke Liming, Xing Li, Chen Yuhua, Huang Chunping. Al3Ti Intermetallic Compounds Fabricated by Rotational Extrusion Alloying[J]. Rare Metal Materials and Engineering,2011,40(10):1812~1816.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2010-10-25
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: