最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
TA2工業純鈦表面攪拌摩擦加工組織及性能
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金 (50774059)


Microstructure and Properties of TA2 Commercially Pure Titanium Surface by Friction Stir Processing
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    對TA2工業純鈦成功實現了攪拌摩擦加工(Friction Stir Processing, FSP)，研究FSP后攪拌區、熱機影響區、熱影響區組織特征，對比分析FSP加工區與母材的顯微硬度及摩擦磨損性能。結果表明：TA2工業純鈦表面經FSP后，攪拌區晶粒發生了劇烈的塑性變形、混合和破碎，實現組織結構的致密化、均勻化和細化；加工區平均硬度相對母材提高37.5%，當摩擦磨損圈數分別為1000、1500、2000 r時，摩擦磨損質量損失分別比母材減少31.4%、36.6%和46.4%，經FSP后TA2工業純鈦表面硬度和抗摩擦磨損性能明顯提高

    Abstract:

    Friction stir processing (FSP) for TA2 commercially pure titanium was performed. The microstructure characteristics of the stir zone, the thermo-mechanically affected zone and the heat affected zone were investigated. The hardness and wear properties of the base material and the friction stir procession specimen were analyzed contrastively. The results indicate that in the surface of TA2 commercially pure titanium after FSP, the grains of the stir zone undergo plastic deformation, blending and breaking to realize the densification and homogenization of the microstructure. The microhardness of the stir zone is increased by 37.5% compared with that of the base material. When the abrasive wear cycle is 1000, 1500 and 2000 r, the abrasion loss of the stir zone is smaller than that of the base material by about 31.4%, 36.6% and 46.4%, respectively. The microhardness and wear properties of the TA2 commercially pure titanium are greatly improved

    參考文獻
    相似文獻
    引證文獻
引用本文

王快社,馬宏剛,,王 文,郭 韡. TA2工業純鈦表面攪拌摩擦加工組織及性能[J].稀有金屬材料與工程,2011,40(9):1530~1533.[Wang Kuaishe, Ma Honggang, Wang Wen, Guo Wei. Microstructure and Properties of TA2 Commercially Pure Titanium Surface by Friction Stir Processing[J]. Rare Metal Materials and Engineering,2011,40(9):1530~1533.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2010-09-15
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: