最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
等離子旋轉電極法制備鈦鋁粉末性能表征
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Characterization of TiAl Powders Prepared by Plasma Rotating Electrode Processing
Author:
Affiliation:

Fund Project:

國家自然科學基金(50674056);南昌航空大學科研基金(EC200701022)

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    采用等離子束旋轉電極法制備Ti-47Al-2Cr-2Nb球形粉末,粉末的平均粒徑d50為85 μm, 松裝密度為2.65 g/cm3。截線法測得粉末的球形度為99.6%;粉末的流動性為10.40 s/50 g;粉末的平均氧、氮含量分別為0.05%和0.004%。XRD分析表明,粉末的相組成為α2相和γ相,主相為富鈦α2相;粉末經熱等靜壓后主相為γ相,伴隨少量α2相。SEM背散射照片表明,粉末顆粒的晶粒為胞狀組織,晶粒平均大小約為2 μm;對不同粒徑的顆粒進行EPMA分析表明,顆粒內部化學成分與預合金棒接近,顆粒表面有部分Al元素揮發,約為2at%

    Abstract:

    Friction stir processing (FSP) was summarized in detail. Its effect on properties of materials and the research on preparation of composites and alloys were also introduced. In addition, the problems of FSP research, the prospect and the future development were pointed out. The influencing factors and formation mechanism of the abnormal grain growth need further studies. FSP combined with melt welding can meet the requirement of welding of high strength materials such as titanium alloys. There will be a good application future for FSP to prepare nano-particles enforced metal matrix composites (MMCs) and intermetallic composites (IMCs). An inventive technique to fabricate materials with homogeneous microstructure by adopting the concepts of FSP is pivotal for its applications

    參考文獻
    相似文獻
    引證文獻
引用本文

楊 鑫,奚正平,劉 詠,湯慧萍,賀衛衛,賈文鵬.等離子旋轉電極法制備鈦鋁粉末性能表征[J].稀有金屬材料與工程,2010,39(12):2251~2254.[Yang Xin, Xi Zhengping, Liu Yong, Tang Huiping, He Weiwei, Jia Wenpeng. Characterization of TiAl Powders Prepared by Plasma Rotating Electrode Processing[J]. Rare Metal Materials and Engineering,2010,39(12):2251~2254.]
DOI:[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2010-07-29
  • 最后修改日期:2010-12-01
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: