最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
Cu0.3Mn0.7去合金化制備納米多孔銅塊體材料
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家“863”計劃項目


Fabrication of Bulk Nanoporous Copper by Dealloying of Cu0.3Mn0.7 Alloy
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用去合金化法對Cu0.3Mn0.7合金進行自腐蝕制備出厚度為1 mm的納米多孔銅塊體材料。采用XRD、SEM、EDS、AAS等分析了樣品的相組成、微觀形貌和元素含量。結果表明：樣品在室溫0.1 mol/L鹽酸溶液中自腐蝕10 d，得到成分單一，結構均勻的三維連通納米多孔銅塊體材料，其表面平均孔徑尺寸約125 nm，平均骨架尺寸約80 nm，橫截面平均孔徑尺寸約300 nm。

    Abstract:

    A bulk nanoporous copper with thickness of 1 mm was fabricated from freely corroded Cu0.3Mn0.7 alloy by means of dealloying. The phases and microstructure of samples were analyzed by XRD, FESEM, EDS and AAS. The results indicate the nanoporous copper with a uniform monolithic structure in three-dimension can be created by free-corrosion dealloying Cu0.3Mn0.7 alloy in 0.1 mol/L HCl solution for 10 d, with an average surface pore diameter of 125 nm and an average ligament size of 80 nm, also with an average cross section pore diameter of 300 nm.

    參考文獻
    相似文獻
    引證文獻
引用本文

劉 海,劉 穎,連利仙,庾正偉,孫文澤,石 博. Cu0.3Mn0.7去合金化制備納米多孔銅塊體材料[J].稀有金屬材料與工程,2010,39(11):2007~2010.[Liu Hai, Liu Ying, Lian Lixian, Yu Zhengwei, Sun Wenze, Shi Bo. Fabrication of Bulk Nanoporous Copper by Dealloying of Cu0.3Mn0.7 Alloy[J]. Rare Metal Materials and Engineering,2010,39(11):2007~2010.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2009-12-04
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: