最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
Ti6Al4V合金超聲深滾層的組織結構特征
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

北京市自然科學基金(3093027)


Microstructure Characteristics of Ultrasound-Aided Deep Rolling Treated Ti6Al4V Alloy
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用超聲深滾技術對Ti6Al4V合金進行表面機械強化處理，使用掃描電鏡、硬度分析、X射線衍射和透射電鏡等分析手段研究超聲深滾處理Ti6Al4V合金表面層的組織結構特征。結果表明：超聲深滾處理后，材料表層組織嚴重細化，形成了納米結構層，表面晶粒尺寸小于20 nm。晶粒細化層的深度約為0.15 mm，在0.15 mm深度處，雖然晶界結構保持完整但晶粒內部位錯密度增加。分析了組織結構細化對于改善疲勞性能的意義

    Abstract:

    Ti6Al4V alloy was treated by ultrasound-aided deep rolling (UADR) for surface mechanical strengthening. The microstructure evolution of the UADR treated specimen was characterized by scanning electron microscopy (SEM), hardness test, X-ray diffraction (XRD) and transmission electron microscopy (TEM). The results show that obvious grain refinement is found after UADR treatment and a nano-structured surface layer is formed with an average grain size less than 20 nm in the immediate surface. Grain boundaries at about 150 μm away from the surface become distinguishable. In this area, although grain boundary structure keeps unchanged, there is an increase of dislocation density in those grains. The effect of grain refinement on fatigue performance was also discussed

    參考文獻
    相似文獻
    引證文獻
引用本文

李 禮,朱有利. Ti6Al4V合金超聲深滾層的組織結構特征[J].稀有金屬材料與工程,2010,39(10):1754~1758.[Li Li, Zhu Youli. Microstructure Characteristics of Ultrasound-Aided Deep Rolling Treated Ti6Al4V Alloy[J]. Rare Metal Materials and Engineering,2010,39(10):1754~1758.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2009-10-15
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: