最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
BT22鈦合金固溶冷卻過程中溫降特性分析
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家重點基礎研究發展計劃((2007CB613805)


Temperature Drop Characteristic Analysis of Solid-Solution Treated BT22 Titanium Alloy during Cooling
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用ANSYS有限元分析軟件對BT22鈦合金固溶熱處理后降溫階段溫度場進行模擬，并繪制熱處理工件在降溫過程中的溫度分布等值圖，從溫度-時間曲線和工件內部不同部位溫度曲線兩個角度分析溫降的不均勻性。通過對比實測曲線和模擬曲線發現兩者的相對誤差在2%~5%，同時把實測降溫曲線分為3個階段：快速降溫階段、平緩降溫階段和慢降溫階段，并分析其形成的原因

    Abstract:

    Internal temperature field of solid-solution treated BT22 titanium alloy during cooling was simulated using ANSYS finite element software and the temperature isopleth map of workpieces was plotted during this procedure. Inhomogeneity of temperature distribution during cooling was analyzed from two points of view, i.e. the temperature-time curve and position-temperature curve of workpiece interior. By comparison the relative error of actual curve and simulation curve is 2%-5%. The actual cooling curve was divided into three phases: fast cooling phase, gentle cooling phase and slow cooling phase. The reason of phase formation was also analyzed.

    參考文獻
    相似文獻
    引證文獻
引用本文

吳曉東,葛 鵬,楊冠軍,毛小南,周 偉,馮寶香. BT22鈦合金固溶冷卻過程中溫降特性分析[J].稀有金屬材料與工程,2010,39(2):249~253.[Wu Xiaodong, Ge Peng, Yang Guanjun, Mao Xiaonan, Zhou Wei, Feng Baoxiang. Temperature Drop Characteristic Analysis of Solid-Solution Treated BT22 Titanium Alloy during Cooling[J]. Rare Metal Materials and Engineering,2010,39(2):249~253.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2009-01-12
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: