最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
TiAl基合金金屬型真空吸鑄成形方法研究
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Study on Vacuum Suction Casting for TiAl-Based Alloys
Author:
Affiliation:

Fund Project:

NSCF(50271020, 50771041); Program of Excellent Team in Harbin Institute of Technology

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    提出了一種鈦鋁基合金金屬型真空吸鑄成形新方法，并通過數值模擬研究了TiAl基合金薄板、葉片的充型規律。研究表明，在真空吸鑄過程中，充型速度和石墨吸口直徑的增加，有利于充型分數的提高，另外石墨吸口直徑與反向充填出現的位置密切相關。在凝固過程中，合金從下而上逐層凝固，但隨著鑄型溫度的增加，凝固了的合金在金屬液中所占的比例減少。以數值模擬結果指導試驗，得到質量良好的TiAl基合金薄板和葉片鑄件

    Abstract:

    A novel type of foundry method for TiAl-based alloy is presented in the present paper. The filling processes of Ti-47Al alloy sheet and blade have been studied via numerical simulation. The investigation results indicate that the filling fraction is enhanced by the increase of filling velocity and graphite throat diameter. The graphite throat diameter is the main parameter for the backward filling location in the process of vacuum suction casting. With the increase of mould temperature, the solid fraction is reduced. The alloy solidification begins from bottom to top. The TiAl sheet and the blade are produced by this method. The grain size of the sheet is in the range from 10 μm to 40 μm. There is no obvious shrinkage cavity

    參考文獻
    相似文獻
    引證文獻
引用本文

蘇彥慶,葉喜蔥,郭景杰,傅恒志. TiAl基合金金屬型真空吸鑄成形方法研究[J].稀有金屬材料與工程,2009,38(9):1505~1508.[Su Yanqing, Ye Xicong, Guo Jingjie, Fu Hengzhi. Study on Vacuum Suction Casting for TiAl-Based Alloys[J]. Rare Metal Materials and Engineering,2009,38(9):1505~1508.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2008-10-08
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: