最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
TiNbZr合金在熱處理過程中的微觀組織和力學性能
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Characterization of Microstructure and Mechanical Properties of TiNbZr Alloy during Heat Treatment
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    TiNbZr合金由真空自耗電弧爐熔煉。研究了固溶，時效處理對該合金的微觀組織和力學性能的影響。結果顯示，當合金固溶處理1 h后在300和350 oC時效處理時，合金的抗拉強度高達1000 MPa。當固溶后的合金在400和450 oC時效處理時，出現α相。時效時間對α相的析出有重要的作用。當合金在400 oC時效處理9 h后，抗拉強度為850 MPa，延伸率也保持在11%左右

    Abstract:

    TiNbZr alloy was prepared by vacuum consumable arc melting furnace. The effects of solution and aging heat treatment on the microstructure and mechanical properties of this alloy were studied. The results show that ultimate tensile strength over 1000 MPa can be obtained when the alloy is solutioned for 1 h and then aged at 300 and 350 oC. α phase precipitation appears under the condition of the treatment of solution for 1 h, followed by aging at 400 oC and 450 oC. The aging time plays an important part in α phase precipitation. The ultimate tensile strength increases to 850 MPa and the elongation keeps around 11% when the alloy is aged at 400 ℃ for 9 h

    參考文獻
    相似文獻
    引證文獻
引用本文

王立強,楊冠軍,楊華斌,曹繼敏,呂維潔,張 荻. TiNbZr合金在熱處理過程中的微觀組織和力學性能[J].稀有金屬材料與工程,2009,38(7):1136~1140.[Wang Liqiang, Yang Guanjun, Yang Huabin, Cao Jimin, Lü Weijie, Zhang Di. Characterization of Microstructure and Mechanical Properties of TiNbZr Alloy during Heat Treatment[J]. Rare Metal Materials and Engineering,2009,38(7):1136~1140.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: