最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
脈沖電沉積納米晶Ni-Co合金鍍層腐蝕特性研究
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

福建省科技計劃重點項目(2006H0020);福建省自然科學基金項目(E0410011)


Corrosion Characteristic of Pulsed Electrodeposition Nanocrystalline Ni-Co Alloy Coating
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    采用X射線衍射(XRD)、掃描電鏡(SEM)、能譜分析(EDS)等方法研究了脈沖電沉積法制備納米晶Ni和納米晶Ni-Co合金鍍層的組織結構、表面形貌和成分。用浸泡法和電化學極化法研究了納米晶Ni和不同Co含量的納米晶Ni-Co合金鍍層在3.5% NaCl (質量分數,下同)和5% HCl溶液中的腐蝕行為。結果表明: 通過脈沖電沉積法制備的Ni和Ni-Co合金鍍層具有典型的納米晶結構;隨著含Co量的增加,鍍層的晶粒尺寸減小,硬度增加;所制備的納米晶Ni-Co合金鍍層組織結構均勻致密,其在3.5% NaCl溶

    Abstract:

    The microstructures, the surface morphology and the composition of nanocrystalline Ni and nanocrystalline Ni-Co alloy prepared by pulse electrodeposition have been studied by XRD, SEM and EDS. The corrosion behaviors of nanocrystalline nickel and Ni-Co alloys in the solutions containing 305% (mass fraction) NaCl and 5% (mass fraction) were investigated by soak method and electrochemical polarization method respectively. The experimental results indicate that typical nanocrystalline nickel and Ni-Co alloy coatings can be synthesized by pulse electrodeposition, and the alloying element Co had an effect of solution strengthening and grain size refinement. The nanocrystalline Ni-Co alloy is dense in nature and it exhibited better corrosion resistance in 3.5% (mass fraction) NaCl solution and 5% (mass fraction) HCl solution than the nanocrystalline nickel. The surface morphology of all samples after corrosion in 3.5% (mass fraction) NaCl solution show good corrosion resistance, however, the samples were uniformly corroded in 5% (mass fraction) HCl solution.

    參考文獻
    相似文獻
    引證文獻
引用本文

鐘遠輝,戴品強,許偉長,陳閃閃.脈沖電沉積納米晶Ni-Co合金鍍層腐蝕特性研究[J].稀有金屬材料與工程,2009,38(6):1053~1057.[Zhong Yuanhui, Dai Pinqiang, Xu Weichang, Chen Shanshan. Corrosion Characteristic of Pulsed Electrodeposition Nanocrystalline Ni-Co Alloy Coating[J]. Rare Metal Materials and Engineering,2009,38(6):1053~1057.]
DOI:[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2008-06-27
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: