最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
機械活化熱壓制備新型Cu/Cr2Nb觸頭材料的組織與性能
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金(50474009); 航空科學基金(05G56003); 江西省自然科學基金(0350045); 江西省材料科學與工程研究中心基金(ZX200401001)


The Microstructures and Properties of Novel-Type Cu/Cr2Nb Contact Materials Fabricated Mechanically Activated Hot-Pressing
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    將Cu、Cr、Nb元素粉經25 h機械合金化活化處理后，在1000 ℃保溫1 h的工藝下通過真空熱壓來制備新型Cu/Cr2Nb觸頭材料，研究了不同成分Cu/Cr2Nb觸頭材料的組織和性能。結果表明，在機械合金化過程中未能合成出Cr2Nb，但在熱壓過程中得到了充分合成和析出，所制備的Cu/Cr2Nb觸頭材料的組織均勻細小，Cr2Nb相尺寸在幾個微米。當Cr2Nb含量(質量分?jǐn)?shù))為25%～35%時，Cu/Cr2Nb觸頭材料的致密度與熔滲法和熱壓法制備的常規CuCr50觸頭材料相當，但前者的硬度和電導率卻明顯高

    Abstract:

    Using Cu, Cr, Nb elemental powders activated by mechanical alloying (MA) for 25 h, the novel-type Cu/Cr2Nb contact materials were fabricated by vacuum hot-pressing at 1000 ℃ for 1 h. The microstructures and the properties of Cu/Cr2Nb contact materials with different compositions were investigated. The results show that Cr2Nb phase can not be synthesized during MA, but can be fully synthesized during vacuum hot-pressing. The prepared Cu/Cr2Nb contact materials have homogeneous and fine microstructures, and Cr2Nb phase sizes fall in several micro. The relative density of Cu/Cr2Nb contact materials with 25%~35% Cr2Nb is comparable with those of CuCr50 prepared by conventional or infiltrating process, but the hardness and conductivity of the former are obviously superior to those of the latter

    參考文獻
    相似文獻
    引證文獻
引用本文

魯世強,胡春文,王克魯,李 鑫,肖 璇,賀躍輝.機械活化熱壓制備新型Cu/Cr2Nb觸頭材料的組織與性能[J].稀有金屬材料與工程,2009,38(5):842~846.[Lu Shiqiang, Hu Chunwen, Wang Kelu, Li Xin, Xiao Xuan, He Yuehui. The Microstructures and Properties of Novel-Type Cu/Cr2Nb Contact Materials Fabricated Mechanically Activated Hot-Pressing[J]. Rare Metal Materials and Engineering,2009,38(5):842~846.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2008-05-21
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: