最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
V40-Fe8-Ti-Cr(Ti/Cr=0.95~1.20)合金的結構與吸放氫特性
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家863項目(2007AA05Z114)


The Structures and Hydrogen Absorption-Desorption Properties of V40-Fe8-Ti-Cr(Ti/Cr=0.95~1.20) Alloys
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    研究了V40-Fe8-Ti-Cr(Ti/Cr=0.95~1.20) 四元合金的結構及吸放氫性能。結果表明：不同Ti/Cr比的合金均為bcc單相結構，隨著Ti/Cr比的降低，合金的晶格常數降低，平臺壓升高，吸氫量降低，放氫量先增加后降低；當Ti/Cr為1時，得到合金V40Ti26Cr26Fe8在298 K下具有最大的放氫量2.4%(質量分?jǐn)?shù))，平臺壓為0.24 MPa。通過計算得到V40Ti26Cr26Fe8的焓變ΔH和熵變ΔS分別為–39.6 kJ·mol-1H和–140.3 J·mol-1·K-1，在4

    Abstract:

    The structures and hydrogen absorption-desorption properties of V40-Fe8-Ti-Cr(Ti/Cr=0.95~1.20) alloys were investigated. All the studied alloys are single-phase with bcc structure. With the decrease of Ti/Cr ratio, the lattice parameters decrease, plateau pressures increase, and hydrogen absorption capacities increase first, then decrease. The V40Ti26Cr26Fe8 alloy with a Ti/Cr ratio of 1.00 has the maximum hydrogen desorption capacity of 2.4% mass fraction with a plateau pressure of 0.24 MPa at 298 K. ΔH and ΔS of the V40Ti26Cr26Fe8 alloy are –39.6 kJ·mol-1H and –140.3 J·mol-1·K-1, respectively, and its plateau pressure at 423 K is calculated to be 27.5 MPa

    參考文獻
    相似文獻
    引證文獻
引用本文

童桂容,陳云貴,吳朝玲,鄭 欣,閆康平,周晶晶. V40-Fe8-Ti-Cr(Ti/Cr=0.95~1.20)合金的結構與吸放氫特性[J].稀有金屬材料與工程,2009,38(5):812~820.[Tong Guirong, Chen Yungui, Wu Chaoling, Zheng Xin, Yan Kangping, Zhou Jingjing. The Structures and Hydrogen Absorption-Desorption Properties of V40-Fe8-Ti-Cr(Ti/Cr=0.95~1.20) Alloys[J]. Rare Metal Materials and Engineering,2009,38(5):812~820.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2008-05-30
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: