最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
冷拉過程中TiNbZr合金的微觀組織和力學性能
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Microstructure and Mechanical Properties of TiNbZr Alloy during Cold Drawing
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    研究了TiNbZr生物β鈦合金的冷加工性能。TiNbZr合金由真空自耗電弧爐熔煉，實驗過程中采用冷拉變形方式。在冷拉過程中，合金表現出良好的冷加工性能。當冷變形率在20%左右時，出現變形孿晶，使得合金強度有大幅度提高。在隨后的冷變形過程中，位錯滑移為主要的塑性變形方式。當冷變形率為80%時，抗拉強度達到1170 MPa，延伸率也大于10%。在該冷變形率下，晶粒得到顯著細化，晶粒尺寸在20 nm到50 nm之間。

    Abstract:

    The cold workability of solution-treated TiNbZr biomedical β titanium alloy was investigated. TiNbZr alloy was fabricated by vacuum consumable arc melting furnace. Cold drawing was carried out for further deformation of the studied alloy. During cold drawing, the alloy exhibited excellent workability. Deformation twins appeared when the reduction of cold deformation was around 20%. Dislocations slipping contributed much to plastic deformation in further drawing. The ultimate tensile strength will go up to 1170 MPa and the elongation is larger than 10% when the reduction reaches 80%. Small grains ranging from 20 nm to 50 nm can be obtained when the reduction is 80%.

    參考文獻
    相似文獻
    引證文獻
引用本文

王立強,楊冠軍,楊華斌,曹繼敏,呂維潔,張 荻.冷拉過程中TiNbZr合金的微觀組織和力學性能[J].稀有金屬材料與工程,2009,38(4):579~582.[Wang Liqiang, Yang Guanjun, Yang Huabin, Cao Jimin, Lü Weijie, Zhang Di. Microstructure and Mechanical Properties of TiNbZr Alloy during Cold Drawing[J]. Rare Metal Materials and Engineering,2009,38(4):579~582.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2008-04-19
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: