最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
聚氨酯海綿浸滲法制備高孔隙率泡沫銅
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家“973”項目（2006CB601201）


Preparation of High Porosity Copper Foam by Polyurethane Sponge Impregnation Method
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用聚氨酯海綿浸滲法制備了具有高孔隙率（85%~95%）、通孔結構的泡沫銅。根據聚氨酯海綿浸滲法的工藝特點討論了泡沫銅的燒結制度，分析檢測了泡沫銅成分，并對一次浸滲和二次浸滲兩種工藝流程制備得到的泡沫銅的孔隙形貌和壓縮性能進行了對比。結果表明，通過二次浸滲工藝可以改變泡沫銅孔壁微觀組織結構，并在孔隙率下降不大的情況下使泡沫銅的壓縮應力平臺從0.5 MPa提高到1 MPa，這對改善材料的能量吸收性能具有重要意義。

    Abstract:

    The polyurethane sponge impregnation method was used to prepare copper foam with a high porosity (85%~95%) and open-cell structure. The sintering technology was discussed in accordance with the characteristics of this method. Additionally, the composition of copper foam was analyzed and the microstructure and compressive performances of copper foam fabricated by single-impregnating and double-impregnating were measured and compared. It is indicated that the microstructure at cell wall of the copper foam can be changed and the porosity decreases slightly after treatment of double impregnating, but the compressive stress level increases from 0.5 MPa to 1 MPa which is of great importance for improving the performance of material energy absorption.

    參考文獻
    相似文獻
    引證文獻
引用本文

吳 成,喬冠軍,王紅潔,金志浩.聚氨酯海綿浸滲法制備高孔隙率泡沫銅[J].稀有金屬材料與工程,2009,38(4):722~725.[Wu Cheng, Qiao Guanjun, Wang Hongjie, Jin Zhihao. Preparation of High Porosity Copper Foam by Polyurethane Sponge Impregnation Method[J]. Rare Metal Materials and Engineering,2009,38(4):722~725.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2008-03-31
  • 最后修改日期:2008-06-20
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: