最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
TC4鈦合金激光焊接接頭組織與性能
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Microstructure and Mechanical Properties of Ti-6AL-4V Joints by Laser Beam Welding
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    分析不同激光焊接工藝參數下焊縫的微觀組織特征，并測試焊縫的力學性能。結果表明：TC4鈦合金激光焊接焊縫為針狀馬氏體α′組成的網籃組織和少量α″相；隨著焊接熱輸入量的增加，由于熔池?cái)嚢琛⒑附討?yīng)力、合金元素?zé)龘p等原因，馬氏體的分布更加散亂和密集；焊接工藝參數對焊縫相組成和各相相對含量的影響均不顯著。合理的焊接工藝參數下，接頭的強度高于母材

    Abstract:

    The microstructure of Ti-6Al-4V joints by laser beam welding with different welding parameters was studied, and the tensile properties were investigated. The microstructure of welding seam by laser beam welding consists mainly of α′ martensite phase as well as some α″ phase. By increasing the weld heat input，the distribution of martensite becomes more dispersive and glomerate due to the molten pool stiring, the welding stress and the burning loss of alloy elements. However, the welding parameters have no obviously effects on both the phase composition and the phase ratio. The tensile strength of joints is higher than basal metal when welded with reasonable parameters

    參考文獻
    相似文獻
    引證文獻
引用本文

楊 靜,程?hào)|海,黃繼華,張 華,趙興科,郭和平. TC4鈦合金激光焊接接頭組織與性能[J].稀有金屬材料與工程,2009,38(2):259~262.[Yang Jing, Cheng Donghai, Huang Jihua, Zhang Hua, Zhao Xingke, Guo Heping. Microstructure and Mechanical Properties of Ti-6AL-4V Joints by Laser Beam Welding[J]. Rare Metal Materials and Engineering,2009,38(2):259~262.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2008-01-25
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: